IC1K-40RD-1.27SFB Datasheet PDF


Part Number

IC1K-40RD-1.27SFB

Description

PC Card Socket Connector Complies with PC card Standard

Manufacture

Hirose

Total Page 4 Pages
PDF Download
Download IC1K-40RD-1.27SFB Datasheet PDF


Features Datasheet pdf PC Card Socket Connector Complies with P C card Standard IC1 Series sFeatures 1. Compliant with PC Card Standards Polar ized entry prevents wrong insertion int o a corresponding connector. And sequen tial contact engagement prevents electo rostatic discharge,avoiding possible da mage to sensitive board circuits. 2. S uited to Automatic Mounting Packaged fo r a board placement with aoutmated equi pment. 3. Lead Offset Available with s everal board termination levels,to allo w use of different height board compone nts. In relation to the center line of connector,0.2mm,+0.3mm,+0.55mm,+0.9mm a nd terminations on board center are ava ilable. -55ç to +85ç (Note 1) 95% R.H . max. (No condensation) Specification.
Keywords IC1K-40RD-1.27SFB, datasheet, pdf, Hirose, PC, Card, Socket, Connector, Complies, with, PC, card, Standard, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent

IC1K-40RD-1.27SFB Datasheet
PC Card Socket Connector Complies with PC card Standard
IC1 Series
sProduct Specifications
sFeatures
1. Compliant with PC Card Standards
Polarized entry prevents wrong insertion into a
corresponding connector. And sequential
contact engagement prevents electorostatic
discharge,avoiding possible damage to sensitive
board circuits.
2. Suited to Automatic Mounting
Packaged for a board placement with aoutmated
equipment.
3. Lead Offset
Available with several board termination
levels,to allow use of different height board
components.
In relation to the center line of connector,-
0.2mm,+0.3mm,+0.55mm,+0.9mm and
terminations on board center are available.
Ratings
Current rating 0.5 A
Operating temperature
Operating humidity
Voltage rating 125 V AC
-55ç to +85ç (Note 1)
95% R.H. max.
(No condensation)
Storage temperature -40ç to +70ç (Note 2)
Storage humidity
40% to 70% (Note 2)
Item
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
4. Vibration
Specification
1000M ohms min.
No flashover or insulation breakdown.
40 m ohms max. (initial value) (Note 3)
No electrical discontinuity of 100ns or
more
500 V DC
500 V AC / 1 minute
1 mA
Conditions
Frequency: 10 to 2000 Hz, single amplitude of 1.52 mm or
acceleration of 147 m/s2(peak), 4 hours in each of the 3 directions.
5. Humidity (Steady state) Insulation resistance: 100 M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature cycle
No damage, cracks, or parts looseness.
-55ç, 30 min /15 to 30ç, within 5 min/85ç, 30 min
/15 to 35ç, within 5 min, for 5 cycles
7. Durability
(Insertion/withdrawal)
8. Resistance to
soldering heat
Change of contact resistance from the
start should be 20 m ohms max.
No deformation of components
affecting performance.
10000 cycles at 400 to 600 cycles per hour
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during
transportation.
sMaterials
Part
Insulator
Contact
Material
PPS
IC1K,IC1HA:Phosphor bronze
Others:Beryllium copper
Finish
Color : Black
Contact Area : gold plating
Lead Area : solder plating
Remarks
UL94V-0
-----------------
A52




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)