Module. IC693MDL760 Datasheet

IC693MDL760 Datasheet PDF


Part

IC693MDL760

Description

Solenoid Valve Output Module

Manufacture

ETC

Page 6 Pages
Datasheet
Download IC693MDL760 Datasheet


IC693MDL760 Datasheet
www.DataSheet4U.com
GFK-1881A
November 2000
Solenoid Valve Output Module
IC693MDL760
Product Description
Description
This IC693MDL760 output module provides eleven
pneumatic outputs and five 24VDC sourcing outputs. For
each pneumatic output, the module contains an internal 3-
way solenoid-actuated valve and an associated output
fitting, which is located on the front panel. When an
output is turned ON, its internal valve connects a user-
supplied pressure source (100 psi maximum) to the output
fitting. The pressure source is connected to the fitting on
the bottom of the module. When the output is turned
OFF, the valve’s output port is vented to atmosphere
inside the module. Solenoid power is supplied from an
external 24VDC source to the “DC Outputs” connector on
the front panel.
A 12-pin connector, located on the module’s front panel,
allows the user to connect the optional IC693ACC760
Solenoid Forcing Pendent, described later.
The five 24VDC outputs can each drive up to a maximum
0.5A, with a limit of 2.0A total for all five points. Field
wiring is connected to these outputs via a 10-pin
connector located on the front panel. The user must
provide 24VDC to this connector to power the positive
logic outputs, which source current to the field
connections. This group of five discrete outputs is
electrically isolated from the PLC backplane; however,
the outputs are not individually isolated from each other.
The module is accessed from the logic program as a
standard 16-point output module. When using VersaPro
version 2.0 (or later version) programming software, it
should be configured by its catalog number. When using
programming software other than VersaPro version 2.0
(or later version), the module must be configured as a
standard 16-point generic output module.
PWR
11
2
23
4
35
6
47
8
9
5 10
61
2
73
4
85
9
10
11
Figure 1. IC693MDL760 Module
The module is enclosed in a standard IC693 plastic
housing.

IC693MDL760 Datasheet
www.DataSheet4U.com
2
GFK-1881A
Solenoid Valve Output Module
Module Specifications
Table 1. Module Specifications
Module Specifications
Pneumatic Outputs
Outputs per Module
11 (grouped)
Thermal Derating
Supply Pressure
Refer to Table 2
100 psi max.
Pressure Drop
External Solenoid Power
Isolation
25 psi max.@ 0.25scfm
21.6-26.4VDC, 24VDC nominal
1500 volts between field side and logic side; 500 volts between
groups
Solenoid Inrush Current
33mA/valve @ 24VDC
Solenoid Holding Current
13mA/valve @ 24VDC
ON Response Time
12ms max.
OFF Response Time
12ms max.
Maximum Solenoid ON Time
Output Fitting
30 days max. (must be turned OFF at least once every 30 days)
Threaded for 10-32 adapter, 1/16hose barb provided
Supply Fitting
Threaded for 10-32 adapter, 1/8hose barb provided
LED Indicators for output points One LED per output point indicates ON/OFF state
LED “PWR” Indicator
LED indicates solenoid power is present
DC Outputs
Outputs per Module
Thermal Derating
Output Voltage
Isolation
Continuous Load Current
Inrush Current
Voltage Drop
Leakage Current
ON Response Time
OFF Response Time
Protection (each output)
LED Indicators
5 (grouped)
None
18-30VDC, 24VDC nominal
1500 volts between field side and logic side; 500 volts between
groups
0.5A @ 30VDC per point, 2.0A total for all five points
2.0A for 100ms
0.5V max
1mA @ 30VDC max
2ms max.
2ms max.
No internal fuse
One LED per output shows on/off state
Module Characteristics
Operational Ambient
Temperature
Backplane Current
45°C (113° F) max.
75mA from 5V bus (solenoid LEDs are powered from external
power source)


Features Datasheet pdf www.DataSheet4U.com Solenoid Valve Outp ut Module IC693MDL760 GFK-1881A Novembe r 2000 Product Description Descriptio n This IC693MDL760 output module provid es eleven pneumatic outputs and five 24 VDC sourcing outputs. For each pneumati c output, the module contains an intern al 3way solenoid-actuated valve and an associated output fitting, which is loc ated on the front panel. When an output is turned ON, its internal valve conne cts a usersupplied pressure source (100 psi maximum) to the output fitting. Th e pressure source is connected to the f itting on the bottom of the module. Whe n the output is turned OFF, the valve s output port is vented to atmosphere inside the module. Solenoid power is su pplied from an external 24VDC source to the “DC Outputs” connector on the front panel. A 12-pin connector, locate d on the module’s front panel, allows the user to connect the optional IC693 ACC760 Solenoid Forcing Pendent, descri bed later. The five 24VDC outputs can each drive up to a maximum 0.5A, .
Keywords IC693MDL760, datasheet, pdf, ETC, Solenoid, Valve, Output, Module, C693MDL760, 693MDL760, 93MDL760, IC693MDL76, IC693MDL7, IC693MDL, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)