2-PHASE STEPPER MOTOR DRIVER
MITSUBISHI
M54646AP
2-PHASE STEPPER MOTOR DRIVER
DESCRIPTION
The M54646AP is a semiconductor IC ...
Description
MITSUBISHI
M54646AP
2-PHASE STEPPER MOTOR DRIVER
DESCRIPTION
The M54646AP is a semiconductor IC to drive bipolar stepper motors by controlling winding current with reference to a designated current level.
PIN CONFIGURATION (TOP VIEW)
FEATURES
q Wide driver voltage range (10 – 40V) q Wide output current control range (20 – 800mA) q Bipolar and constant current control q Built-in flywheel diode q Built-in thermal protection circuit
Comparator input (1) C1 → Comparator reference VR1 → voltage input (1) Output stage VMM1 supply voltage (1) Output terminal (1) MA1 ← Current sensor (1)
1 2 3 4
28 ← C2 27 ← VR2
Comparator input (2)
Comparator reference voltage input (2) 26 VMM2 Output stage supply voltage (2) 25 → MA2 Output terminal (2) 24 → E2 23 22 GND 21 20 19 → MB2 Output terminal (2) 18 VMM2 Output stage supply voltage (2) 17 VCC2 Power supply (2) 16 → ← T2 One-shot multi time constant 15 ← Ph2 Output current direction switch Current sensor (2)
E1 ← 5 6
M54646AP
APPLICATION
Office automation equipment such as printers, FDDs, HDDs and facsimiles
GND
7 8 9
FUNCTION
M54646AP Integrated Circuit drives two-phase bipolar stepper motors while controlling winding current: It controls winding current direction by inputting phases (pins 14 and 15) and, at the same time, controls winding current amperage with terminals VR (pins 2 and 27 ). Provided with control circuits that output two phases, this IC is sufficient to drive a two-phase bipolar stepper ...
Similar Datasheet