2-PHASE STEPPER MOTOR DRIVER
MITSUBISHI
M54670P
2-PHASE STEPPER MOTOR DRIVER
DESCRIPTION
The M54670P is a semiconductor IC to...
Description
MITSUBISHI
M54670P
2-PHASE STEPPER MOTOR DRIVER
DESCRIPTION
The M54670P is a semiconductor IC to drive a bipolar stepper motor directly by controlling the coil current with the constant current method.
PIN CONFIGURATION (TOP VIEW)
Triangular wave
CT 1
32 VCC 31 VR(B)
Circuit power supply
FEATURES
q Wide operating voltage range (10 – 35V) q Wide output current control range (20 – 800mA) q Bipolar and constant current drive q Built in flywheel q Current level can be changed by steps or continuously. q Built in a thermal shutdown circuit
Comparator reference input(A) VR(A) 2 Output current direction switching(A) Ph(A) 3 Output power supply(A) VMM1(A) 4 Output(A)
Comparator reference input(B) Output current 30 Ph(B) direction switching(B) Output power 29 VMM1(B) supply(B)
O1(A) 5 6 7
28 O1(B) Output(B) 27 26 25 24 23 22 E(B) 21 O2(B)
Current sensor(B) Output(B) Output power
M54670P
GND
8 9 10
GND
APPLICATION
Office automation equipment such as printer, FDD, HDD, and FAX
FUNCTION
The M54670P can drive a stepper motor by the 2-phase bipolar method and also control the coil current. Furthermore, it controls the direction of the coil current with Ph input pins (pins 3 and 30). The coil current value can be selected among four levels (0 to max.) by selecting the combination of three internal comparators by logic input (pins 14, 15, 18 and 19). It also can be continuously controlled with VR pins (pins 2 and 31). By selecting an I input pin among p...
Similar Datasheet