Document
K3010P(G) Series
Vishay Telefunken
Optocoupler with Phototriac Output
Description
The K3010P(G) series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package. The elements are mounted on one leadframe using a coplanar technique, providing a fixed distance between input and output for highest safety requirements.
Applications
Circuits for safe protective separation against electrical shock according to safety class II (reinforced isolation):
14827
D For appl. class I – IV at mains voltage ≤ 300 V D For appl. class I – III at mains voltage ≤ 600 V
according to VDE 0884, table 2, suitable for: Monitors, air conditioners, line switches, solid state relays, microwaves.
~
6 5
~
4
VDE Standards
These couplers perform safety functions according to the following equipment standards:
1 2 3
95 10812
D VDE 0884
Optocoupler for electrical safety requirements
A (+) C (–) nc Note: Pin 5 must not be connected
D IEC 950/EN 60950
Office machines (applied for reinforced isolation for mains voltage ≤ 400 VRMS)
D VDE 0804
Telecommunication apparatus and data processing
D IEC 65
Safety for mains-operated electronic and related household apparatus
Order Instruction
Ordering Code CTR Ranking K3010P/ K3010PG1) < 15 mA 1) K3011P/ K3011PG < 10 mA K3012P/ K3012PG1) < 5 mA 1) G = Leadform 10.16 mm; G is not marked on the body Remarks
Document Number 83504 Rev. A4, 13–Sep–99
www.vishay.de • FaxBack +1-408-970-5600 1 (9)
K3010P(G) Series
Vishay Telefunken Features
Approvals:
D Rated recurring peak voltage (repetitive)
VIORM = 600 VRMS D Creepage current resistance according to VDE 0303/IEC 112 Comparative Tracking Index: CTI = 275 D Thickness through insulation ≥ 0.75 mm General features:
D BSI: BS EN 41003, BS EN 60095 (BS 415),
BS EN 60950 (BS 7002), Certificate number 7081 and 7402
D FIMKO (SETI): EN 60950,
Certificate number 12398
D Underwriters Laboratory (UL) 1577 recognized,
file number E-76222
D VDE 0884, Certificate number 94778
VDE 0884 related features:
D Rated impulse voltage (transient overvoltage)
VIOTM = 6 kV peak D Isolation test voltage (partial discharge test voltage) Vpd = 1.6 kV D Rated isolation voltage (RMS includes DC) VIOWM = 600 VRMS (848 V peak)
D Isolation materials according to UL 94-VO D Pollution degree 2 (DIN/VDE 0110 resp. IEC 664) D Climatic classification 55/100/21 (IEC 68 part 1) D Special construction:
Therefore, extra low coupling capacity of typical 0.2 pF, high Common Mode Rejection D IFT offered in 3 groups D Coupling System C
Absolute Maximum Ratings
Input (Emitter)
Parameter Reverse voltage Forward current Forward surge current Power dissipation Junction temperature Test Conditions Symbol VR IF IFSM PV Tj Value 5 80 3 100 100 Unit V mA A mW °C
tp ≤ 10 ms Tamb ≤ 25°C
Output (Detector)
Parameter Test Conditions Off state output terminal voltage On state RMS current Peak surge current, non-repetitive tp ≤ 10 ms Power dissipation Tamb ≤ 25°C Junction temperature Symbol VDRM ITRMS ITMS PV Tj Value 250 100 1.5 300 100 Unit V mA A mW °C
Coupler
Parameter Test Conditions Isolation test voltage (RMS) t = 1 min Total power dissipation Tamb ≤ 25°C Ambient temperature range Storage temperature range Soldering temperature 2 mm from case, t ≤ 10 s 1) Related to standard climate 23/50 DIN 50014 Symbol VIO 1) Ptot Tamb Tstg Tsd Value 3.75 350 –40 to +85 –55 to +100 260 Unit kV mW °C °C °C
www.vishay.de • FaxBack +1-408-970-5600 2 (9)
Document Number 83504 Rev. A4, 13–Sep–99
K3010P(G) Series
Vishay Telefunken Electrical Characteristics (Tamb = 25°C)
Input (Emitter)
Parameter Forward voltage Junction capacitance Test Conditions IF = 50 mA VR = 0, f = 1 MHz Symbol VF Cj Min. Typ. 1.25 50 Max. 1.6 Unit V pF
Output (Detector)
Parameter Forward peak off-state voltage (repetitive) Peak on-state voltage Critical rate of rise of off-state voltage
1)
Test Conditions IDRM = 100 nA ITM = 100 mA IFT = 0, IFT = 30 mA
Symbol VDRM 1) VTM (dv/dt)cr (dv/dt)crq
Min. 250
Typ.
Max.
Unit V V V/ms V/ms
0.1
1.5 10 0.2
3
Test voltage must be applied within dv/dt ratings
Coupler
Parameter Emitting g diode trigger gg current Test Conditions Type VS = 3 V, RL = 150 W K3010P(G) K3011P(G) K3012P(G) Holding current IF = 10 mA, VS ≥ 3 V Note: IFT is defined as a minimum trigger current Symbol IFT IFT IFT IH Min. Typ. 8 5 2 100 Max. 15 10 5 Unit mA mA mA mA
RS
IFT RL
95 10813
V~
Test condition: dv/dtcr VS = 2/3 VDRM (Sine wave) RL = 33 kΩ dv/dtcrq Veff = 30 V (Sine wave) RL = 2 kΩ
Figure 1. Test circuit for dv/dtcr and dv/dtcrp
Document Number 83504 Rev. A4, 13–Sep–99
www.vishay.de • FaxBack +1-408-970-5600 3 (9)
K3010P(G) Series
Vishay Telefunken
IF
yI
FT
95 10814
IF = 0 dv / dtcrq
dv/dtcr
dv / dtcr
Highest value of the “rate of rise of off-state voltage” which does not cause any switching from the off-state to the on-state dv/dtcrq Highest value of the “rate of rise of communicating voltage” which does not swit.