DatasheetsPDF.com

LB1267M Dataheets PDF



Part Number LB1267M
Manufacturers Sanyo
Logo Sanyo
Description 2-Channel / High-Current / Low-Saturation Driver Array
Datasheet LB1267M DatasheetLB1267M Datasheet (PDF)

Ordering number:ENN2625A Monolithic Digital IC LB1267M 2-Channel, High-Current, Low-Saturation Driver Array Functions • 2-channel magnet driver. Features • High current (2.0A max.) and low saturation voltage (1.5V). • On-chip spark killer diodes. Package Dimensions unit:mm 3032C-MFP8 [LB1267M] 5.1 85 1 (0.65) 1.27 4 0.35 0.15 0.1 (1.5) 4.4 1.7max 6.4 0.63 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Maximum supply voltage Output supply voltage Input supply voltage Out.

  LB1267M   LB1267M



Document
Ordering number:ENN2625A Monolithic Digital IC LB1267M 2-Channel, High-Current, Low-Saturation Driver Array Functions • 2-channel magnet driver. Features • High current (2.0A max.) and low saturation voltage (1.5V). • On-chip spark killer diodes. Package Dimensions unit:mm 3032C-MFP8 [LB1267M] 5.1 85 1 (0.65) 1.27 4 0.35 0.15 0.1 (1.5) 4.4 1.7max 6.4 0.63 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Maximum supply voltage Output supply voltage Input supply voltage Output current Spark killer diode forward current VCC instantaneous flow-out current GND pin flow-out current Allowable power dissipation Operating temperature Storage temperature Symbol VCC max VOUT VIN IOUT1 IOUT2 IFSM1 IFSM2 ICCP IGND Pd max Topr Tstg Conditions Solenoid drive stage (ch1) Motor drive stage (ch2) Solenoid drive stage (ch1) Motor drive stage (ch2) Allowable Operating Ranges at Ta = 25˚C Parameter Supply voltage Input H-level voltage Input L-level voltage Symbol VCC VIH VIL IOUT=300mA IOUT≤100µA Conditions SANYO : MFP8 Ratings 8.0 10.0 12.0 1.0 2.5 1.0 2.5 3.0 3.0 300 –20 to +75 –40 to +125 Unit V V V A A A A A A mW ˚C ˚C Ratings 3.0 to 7.0 3.0 to 11.0 –0.3 to +0.7 Unit V V V Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 22801TN (KT)/O3195YK/7107TA, TS No.2625–1/3 LB1267M Electrical Characteristics at Ta = 25˚C Parameter Output voltage Input current Power source+output leakage current Spark killer diode forward voltage Output sustain voltage Symbol Conditions VOH1 VOH2 VOH3 VOH4 VOH5 IIN1 IIN2 I(OFF) VF1 VF2 VO(SUS) VIN=4.5V, VCC=5.0V, IOUT=500mA (ch1) VIN=6.0V, VCC=7.0V, IOUT=1000mA (ch1) VIN=3.0V, VCC=3.0V, IOUT=300mA (ch2) VIN=4.5V, VCC=5.0V, IOUT=1000mA (ch2) VIN=6.0V, VCC=7.0V, IOUT=2000mA (ch2) VIN=6.0V (ch1) VIN=6.0V (ch2) VIN=0.5V, VOUT=VCC=6.0V IF=1000mA(ch1) IF=2000mA(ch2) IOUT=400mA Ratings min typ 0.5 1.0 10 max 0.65 1.4 0.25 0.7 1.5 1.0 2.0 30 3.0 3.0 Unit V V V V V mA mA µA V V V Pin Assignment Equivalent Circuit No.2625–2/3 LB1267M Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume product.


LB1267 LB1267M LB1268


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)