LD1084
5 A low-drop positive voltage regulator adjustable
TO-220
Datasheet - production data
LD1084 quiescent current...
LD1084
5 A low-drop positive voltage
regulator adjustable
TO-220
Datasheet - production data
LD1084 quiescent current flows into the load, so to increase the efficiency. A minimum capacitor of 10 µF is needed for stability.
The device is supplied in TO-220. The on-chip trimming allows the
regulator to reach a very tight output voltage tolerance, within ± 1% at 25 °C.
Table 1. Device summary
Order code
Output voltage
LD1084V
adjustable
Features
Typical dropout 1.3 V (at 5 A) Three-terminal adjustable output voltage Guaranteed output current up to 5 A Output tolerance ± 1% at 25 °C and ± 2% in full
temperature range Internal power and thermal limit Wide operating temperature range -40 °C to
125 °C Package available: TO-220 Pinout compatibility with standard adjustable
VREG
Description
The LD1084 is a low-drop voltage
regulator providing up to 5 A of output current. Dropout is guaranteed at a maximum of 1.5 V at the maximum output current, decreasing at lower loads. The LD1084 is pin-to-pin compatible with the older 3-terminal adjustable
regulators, but it has better performances in terms of drop and output tolerance.
Unlike
PNP regulators, where a part of the output current is wasted as quiescent current, the
September 2013
This is information on a product in full production.
DocID9035 Rev 10
1/16
www.st.com
16
Contents
Contents
LD1084
1 Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...