DatasheetsPDF.com

LD421650 Dataheets PDF



Part Number LD421650
Manufacturers Powerex Powers
Logo Powerex Powers
Description Dual SCR/Diode-Module
Datasheet LD421650 DatasheetLD421650 Datasheet (PDF)

LD42__50 Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK Dual SCR/Diode Isolated Module 500 Amperes / Up to 1600 Volts TM OUTLINE DRAWING A R B C J F Description: Powerex Dual SCR/Diode Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. LD42__50 Dual.

  LD421650   LD421650


Document
LD42__50 Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK Dual SCR/Diode Isolated Module 500 Amperes / Up to 1600 Volts TM OUTLINE DRAWING A R B C J F Description: Powerex Dual SCR/Diode Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. LD42__50 Dual SCR/Diode TM POW-R-BLOK Module 500 Amperes / 800-1600 Volts K G D 3 2 1 L Q - DIA. (4 TYP.) H P - M10 THD (3 TYP.) Features: T T T T T Electrically Isolated Heatsinking Aluminum Nitride Isolator Compression Bonded Elements Metal Baseplate Low Thermal Impedance for Improved Current Capability T UL Recognized M T - (2 TYP.) S LD42 Outline Dimensions E 4 5 Dimension A N Inches 5.91 4.88 4.41 2.36 2.05 1.97 1.89 1.73 1.22 1.10 1.00 0.69 0.39 M10 Metric 0.26 Dia. 0.24 0.12 .110 x .032 Millimeters 150.0 124.0 112.0 60.0 52.0 50.0 48.0 44.0 31.0 28.0 25.4 17.5 10.0 M10 6.5 Dia. 6.0 3.0 2.5 x 0.8 B C D Benefits: T No Additional Insulation Components Required T Easy Installation T No Clamping Components Required T Reduce Engineering Time 5 4 2 1 E F 3 G H J K CONNECTION DIAGRAM Applications: T T T T T Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends Ordering Information: L M N P Q R S T Select the complete eight-digit module part number from the table below. Example: LD421650 is a 1600Volt, 500 Ampere Dual SCR/Diode TM Isolated POW-R-BLOK Module. Type LD42 Voltage Volts (x100) 08 10 12 14 16 Current Amperes (x10) 50 Note: Dimensions are for reference only. Revision Date: 12/04/2002 LD42__50 Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK Dual SCR/Diode Isolated Module 500 Amperes / Up to 1600 Volts TM Absolute Maximum Ratings Characteristics Repetitive Peak Forward and Reverse Blocking Voltage Non-Repetitive Peak Blocking Voltage (t < 5 msec) RMS Forward Current Average Forward Current Peak One Cycle Surge Current, Non-Repetitive Peak Three Cycle Surge Current, Non-Repetitive Peak Ten Cycle Surge Current, Non-Repetitive I t for Fusing for One Cycle Maximum Rate-of-Rise of On-State Current, (Repetitive) Operating Temperature Storage Temperature Max. Mounting Torque, M6 Mounting Screw Max. Mounting Torque, M10 Terminal Screw Module Weight, Typical V Isolation @ 25C Vrms 2 Conditions Symbol VDRM & VRRM VRSM up to 1600 VRRM + 100 785 500 17,000 16,300 12,250 10,500 1.20 x 10 1.33 x 10 200 6 6 Units V V A A A A A A A sec 2 A sec A/µs °C °C in. – Lb. Nm in. – Lb. Nm g lb V 2 180° Conduction, TC=86°C 180° Conduction, TC=86°C 60 Hz, 100% VRRM reapplied 50 Hz, 100% VRRM reapplied 60 Hz, 100%VRRM reapplied 60 Hz, 100% VRRM reapplied 8.3 milliseconds 10 milliseconds Per JEDEC Standard 397 5.2.2.6 IT(RMS) /IF(RMS) IT(AV) /IF(AV) ITSM/IFSM ITSM/IFSM ITSM/IFSM ITSM/IFSM It 2 It di/dt TJ Tstg 2 -40 to +130 -40 to +150 55 6 110 12 1500 3.30 3000 Revision Date: 12/04/2002 LD42__50 Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK Dual SCR/Diode Isolated Module 500 Amperes / Up to 1600 Volts TM Electrical Characteristics, TJ=25°C unless otherwise specified Characteristics Repetitive Peak Forward Leakage Current Repetitive Peak Reverse Leakage Current Peak On-State Voltage Threshold Voltage, Low-level Slope Resistance, Low-level Threshold Voltage, High-level Slope Resistance, High-level VTM Coefficients, Full Range Symbol IDRM IRRM VTM /VFM V(TO)1 rT1 V(TO)2 rT2 Test Conditions Up to 1600V, TJ=130°C Up to 1600V, TJ=130°C ITM /IFM =1500A TJ = 130°C, I = 15%IT(AV) to πIT(AV) TJ = 130°C, I = πIT(AV) to ITSM TJ = 130°C, I = 10A to 6kA VTM /VFM = A+ B Ln I +C I + D Sqrt I Minimum dV/dt Gate Trigger Current Gate Trigger Voltage Non-Triggering Gate Voltage Peak Forward Gate Current Peak Reverse Gate Voltage dV/dt IGT VGT VGDM IGTM VGRM Exponential to VDRM Tj=130°C, Gate Open Tj=25°C, VD=12V Tj=25°C, VD=12V Tj=130°C, VD= ½ VDRM A= B= C= D= 1000 Typ. 200 3.0 0.25 4.0 5 Min. Max. 80 80 1.30 0.81 0.32 0.90 0.26 0.8824 -4.46E-02 8.12E-05 1.54E-02 V/µs mA Volts Volts Amp Volts Units mA mA V V mΩ V mΩ Thermal Characteristics Characteristics Thermal Resistance, Junction to Case Thermal Impedance Coefficients Symbol RΘJ-C ZΘJ-C Per Module, both conducting Per Junction, both conducting ZΘJ-C= K1 (1-exp(-t/τ 1)) + K2 (1-exp(-t/τ 2)) + K3 (1-exp(-t/τ 3)) Thermal Resistance, Case to Sink Lubricated RΘC-S + K4 (1-exp(-t/τ 4)) Per Module K1 = 8.03E-04 K2 = 1.03E-02 K3 = 1.64E-02 K4 = 3.75E-02 Max. 0.0325 0.0650 τ 1 = 3.39E-04 τ 2 = 3.15E-03 τ 3 = 0.106 τ 4 = 2.066 0.01 °C/W Units °C/W °C/W Revision Date: 12/04/2002 LD42__50 Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK Dual SCR/Diode Isolated Module 500 Amperes / Up to 1600 Volts TM Maximum On-State .


LD421450 LD421650 LD421843


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)