LM8V311

SHARP APPROVED BY: DATE LIQUlDCRYSTALDISPL4YGROUP SHARPCORPORATlON SPECNo. LC98312 .~ FILENo. ISSU' MAR.30.1998 PAGE 28 Pages REPREZENTATIVEDIVWON ENGINEERINGDEPARTMENT DUTYLCDDEVELOPMENT CENTER NARALIQUIDCRYSTAL DISPLAYGROUP SPECIFICATION DEVlCESPECIFICATIONfoor Passive Matrix Color LCD Module (640 X 480 dots) I L Model No. LMSV311 ., ,. _,’ : .“’ ....a ,--.y _~ ., ) ‘, : ‘,C: q CUSTOMER~APPROVAL DATE BY 1 ,,'. : : DIVISION~ENERALMANAGER DUTYLCDDEVELOPMENTCENTER NAR4LlQtilDCRYSTALDlSPLAYGROUP SHARPCORPORATION SHARP DRAWING No. SPEC x0. .MODEL No. PAGE SHARP LC983 12 LYiM8V311 1 OPrecautions 1) Indusuial(Mechanica1) design of the product in which this LCD module will be incorporated must be made so that the viewing angle characteristics of the LCD may be optimized. This module’s vieGig angle is illustrated in Fig.1. f3 y MIN. < viewing angle < 0 y MAX (For the specific values of 0 y MIN., and B y MAX., refer to the table ) Please consider the optimum viewing conditions according to the purpose when installing the module. Viewin; g direction + 6 y Fie.1 Definition of viewine anele 2) This module should be installed using mounting holes of metal bezel. When installing the module, pay attention and handle carefully not to allow any undue stress such as twist or bend. 3) Since the front polarizer is easily damaged. Please pay attention not to scratch on its face. It is recommended to use a transparent acrylic resin board or other type of protective panel ...