Electronic Ignition Interface
LM9011 Electronic Ignition Interface
February 2000
LM9011 Electronic Ignition Interface
General Description
The LM9011...
Description
LM9011 Electronic Ignition Interface
February 2000
LM9011 Electronic Ignition Interface
General Description
The LM9011 is an interface circuit which integrates the timing detection and logic control functions required for an automotive electronic ignition system into one device. A VRS interface is provided for crankshaft position information via a toothed-wheel. Four voltage comparators are provided for hardware diagnostics. An electronic timing interface with output fault diagnostics is provided to enable a micro-processor to drive an external four channel ignition spark circuit. The LM9011 is fully specified over the automotive temperature range of -40˚C to +125˚C, and is available in a 28 pin Small Outline surface mount package.
Key Specifications Features
n Single 5V supply operation n VR Sensor Interface with dynamic hysteresis n Four Channel Electronic Timing spark driver with output diagnostics n Electronic Timing Interface spark driver output voltage from 5V to 16V n One Non-Inverting voltage comparator with hysteresis n Three Inverting voltage comparators with hysteresis
Connection Diagram
Top View
DS101264-1
Ordering Information LM9011M See NS Package M28B
© 2000 National Semiconductor Corporation
DS101264
www.national.com
LM9011
Absolute Maximum Ratings (Note 1)
Voltage S_HI Voltage VR_HI and VR_LO Inputs Comparator Inputs Timing Interface Inputs ESD Susceptibility (Note 3) Maximum Junction Temperature Storage Temperature Range Lead Soldering Information...
Similar Datasheet