Digital Signal Processor for CIF CMOS Image Cameras
LR38630
LR38630
DESCRIPTION
The LR38630 is a CMOS digital signal processor for color camera systems of 110 k-pixel CMOS...
Description
LR38630
LR38630
DESCRIPTION
The LR38630 is a CMOS digital signal processor for color camera systems of 110 k-pixel CMOS image sensor with primary color mosaic filters. The camera system consists of CIF CMOS image sensor (LZ34C10) and DSP IC (LR38630) with 2 kbit EEPROM. Depending on application, 1 M-bit SRAM can be added in order to get slower frame rate at video output.
Digital Signal Processor for CIF CMOS Image Cameras
FEATURES
Designed for 110 k-pixel color CMOS image sensors with R, G, and B color mosaic filters Compatible with CIF standard External control interface input/output Variable GAMMA and KNEE response 8-bit digital input Available for digital video 4 : 2 : 2 (U/Y/V/Y) output Built-in synchronous signal generation circuit to drive CMOS image sensor Built-in 2 k-bit EEPROM controller to set the camera adjustment data Built-in auto exposure control Built-in auto white balance control Built-in auto carrier balance control Built-in white blemish compensator Lower power consumption by dual clocking signal process technology Single +3.0 V power supply Package : 80-pin LQFP (LQFP080-P-1212) 0.5 mm pin-pitch
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1
LR38630
PIN CONNECTIONS
80-P...
Similar Datasheet