MBRB4030

MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MBRB4030/D SWITCHMODE™ Power Rectifier Using the Schottky Barrier principle with a proprietary barrier metal. These state–of–the–art devices have the following features: Guardring for Stress Protection Maximum Die Size 150°C Operating Junction Temperature Short Heat Sink Tab Manufactured – Not Sheared Mechanical Characteristics Case: Epoxy, Molded Weight: 1.7 Grams (approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads Readily Solderable Shipped 50 Units per Plastic Tube Available in 24 mm Tape and Reel, 800 Units per 13″ Reel by Adding a “T4” Suffix to the Part Number Marking: B4030 MBRB4030 Motorola Preferred Device SCHOTTKY BARRIER RECTIFIER 40 AMPERES 30 VOLTS 4 1 4 3 1 3 CASE 418B–02 D2PAK MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (At Rated VR) TC = +115°C (1) Peak Repetitive Forward Current (At Rated VR, Square Wave, 20 kHz) TC = + 112°C Nonrepetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) Peak Repetitive Reverse Surge Current (2.0 µs, 1.0 kHz) Storage Temperature Operating Junction Temperature Voltage Rate of Change (Rated VR) Reverse Energy (Unclamped Inductive Surge) (Inductance = 3 mH), Tc = 25°C THERMAL CHARACTERISTICS Thermal Resistance – Junction to Case Thermal Resistance – Junction to Ambient (2) ELEC...