MOTOROLA
Designer's
SEMICONDUCTOR TECHNICAL DATA
Order this document by MBRS1100T3/D
Schottky Power Rectifier
Surface...
MOTOROLA
Designer's
SEMICONDUCTOR TECHNICAL DATA
Order this document by MBRS1100T3/D
Schottky Power Rectifier
Surface Mount Power Package
Schottky Power Rectifiers employ the use of the
Schottky Barrier principle in a large area metal-to-silicon power diode. State-of-the-art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and polarity protection diodes, in surface mount applications where compact size and weight are critical to the system. These state-of-the-art devices have the following features: Small Compact Surface Mountable Package with J-Bend Leads Rectangular Package for Automated Handling Highly Stable Oxide Passivated Junction High Blocking Voltage — 100 Volts 150°C Operating Junction Temperature Guardring for Stress Protection
™ Data Sheet
MBRS1100T3
Motorola Preferred Device
SCHOTTKY BARRIER RECTIFIER 1.0 AMPERE 100 VOLTS
Mechanical Characteristics Case: Epoxy, Molded Weight: 95 mg (approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Shipped in 12 mm Tape and Reel, 2500 units per reel Polarity: Notch in Plastic Body Indicates Cathode Lead Marking: B110 MAXIMUM RATINGS
Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectif...