MBRS330

MBRS320T3, MBRS330T3, MBRS340T3, MBRS360T3 Preferred Devices Surface Mount Schottky Power Rectifier . . . employing the Schottky Barrier principle in a large area metal–to–silicon power diode. State–of–the–art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and polarity protection diodes, in surface mount applications where compact size and weight are critical to the system. http://onsemi.com Small Compact Surface Mountable Package with J–Bend Leads Rectangular Package for Automated Handling Highly Stable Oxide Passivated Junction Very Low Forward Voltage Drop (0.5 Volts Max @ 3.0 A, TJ = 25°C) Excellent Ability to Withstand Reverse Avalanche Energy Transients Guardring for Stress Protection SCHOTTKY BARRIER RECTIFIERS 3.0 AMPERES 20, 30, 40, 60 VOLTS Mechanical Characteristics: Case: Epoxy, Molded Weight: 217 mg (approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Shipped in 16 mm Tape and Reel, 2500 units per reel Polarity: Notch in Plastic Body Indicates Cathode Lead Marking: B32, B33, B34, B36 SMC CASE 403 PLASTIC MARKING DIAGRAM YWW B3x B3x x Y W = Device Code = 2, 3, 4 or 6 = Year = Work Week MAXIMUM RATINGS Please See the Table on the Following Page ORDERING INFORMATION ...