MC100EL16

5.0 V ECL Differential Receiver MC10EL16, MC100EL16 Description The MC10EL/100EL16 is a differential receiver. The device is functionally equivalent to the E116 device with higher performance capabilities. With output transition times significantly faster than the E116, the EL16 is ideally suited for interfacing with high frequency sources. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 mF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. Under open input conditions (pulled to VEE) internal input clamps will force the Q output LOW. The 100 Series contains temperature compensation. Features 190 ps Propagation Delay PECL Mode Operating Range: VCC = 4.2 V to 5.7 V with VEE = 0 V NECL Mode Operating Range: VCC = 0 V with VEE = −4.2 V to −5.7 V Internal Input Pulldown Resistors These Devices are Pb-Free, Halogen Free and are RoHS Compliant NC 1 D2 8 VCC 7Q D3 6Q VBB 4 5 VEE Figure 1. Logic Diagram and Pinout Assignment Table 1. PIN DESCRIPTION PIN FUNCTION D, D Q, Q VBB VCC VEE NC ECL Data Inputs ECL Data Outputs Reference Voltage Output Positive Supply Negative Supply No Connect www.onsemi.com 8 1 SOIC−8 NB D SUFFIX CASE 751−07 8 1 TSSOP−8 DT SUFFIX CASE 948R−02 MARKI...