Quad Bus Driver/Receiver with 2-to-1 Output Multiplexers
www.DataSheet4U.com
MC10H330 Quad Bus Driver/Receiver with 2−to−1 Output Multiplexers
Description
The MC10H330 is a Qu...
Description
www.DataSheet4U.com
MC10H330 Quad Bus Driver/Receiver with 2−to−1 Output Multiplexers
Description
The MC10H330 is a Quad Bus Driver/Receiver with two−to−one output multiplexers. These multiplexers have a common select and output enable. When disabled, (OE = high) the bus outputs go to −2.0 V. Their output can be brought to a low state (VOL) by applying a high level to the receiver enable (RE = High). The parameters specified are with 25 W loading on the bus drivers and 50 W loads on the receivers.
Features
http://onsemi.com MARKING DIAGRAMS*
24 MC10H330L AWLYYWW CDIP−24 L SUFFIX CASE 758 1
Propagation Delay, 1.5 ns Typical Data−to−Output Improved Noise Margin 150 mV (Over Operating Voltage and
Temperature Range) Voltage Compensated MECL 10K™ Compatible Pb−Free Packages are Available*
24 MC10H330P AWLYYWWG PDIP−24 P SUFFIX CASE 724 VCC0 YBUS ZBUS OE Y0 Y1 Z0 Z1 RE ZIN YIN VCC0 A WL YY WW G = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package PLCC−28 P SUFFIX CASE 776 1
DIP PIN ASSIGNMENT
VCC XBUS WBUS VCC0 X1 X0 W1 W0 S WIN XIN VEE 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13
1 10H330G AWLYYWW
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet.
Pin assignment is for Dual−in−Line Package. For PLCC pin assignment, see the Pin Conversion Tables on page 18 of the ON Semiconductor MECL Data Book (DL122/D).
*For additional information on our Pb−Free s...
Similar Datasheet