Dual Bus Driver/Receiver with 4-to-1 Output Multiplexers
www.DataSheet4U.com
MC10H332 Dual Bus Driver/Receiver with 4−to−1 Output Multiplexers
Description
The MC10H332 is a Du...
Description
www.DataSheet4U.com
MC10H332 Dual Bus Driver/Receiver with 4−to−1 Output Multiplexers
Description
The MC10H332 is a Dual Bus Driver/Receiver with four−to−one output multiplexers. These multiplexers have common selects and output enable. When disabled, (OE = high) the bus outputs go to −2.0 V. The parameters specified are with 25 W loading on the bus drivers and 50 W loads on the receivers.
Features
http://onsemi.com MARKING DIAGRAMS*
MC10H352P AWLYYWWG
Propagation Delay, 1.5 ns Typical Data−to−Output Improved Noise Margin 150 mV (Over Operating Voltage and
Temperature Range) Voltage Compensated MECL 10K™ Compatible Pb−Free Packages are Available*
PDIP−20 P SUFFIX CASE 738
DIP & PLLC PIN ASSIGNMENT
VCC XBUS X0 X1 X2 X3 S0 S1 XIN VEE 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 VCC02 YBUS OE Y0 Y1 Y2 Y3 RE YIN VCC01 A WL YY WW G 20 1 PLLC−20 FN SUFFIX CASE 775
1 20
10H332G AWLYYWW
= Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package
*For additional marking information, refer to Application Note AND8002/D.
Pin assignment is for Dual−in−Line Package..
NOTE: Each MECL 10H series circuit has been designed to meet the dc specifications shown in the test table, after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse air flow greater than 500 lfpm is maintained. Receiver outputs are terminated through a 50 W resistor to −2.0 Vdc. Bus outputs are terminated through a ...
Similar Datasheet