DatasheetsPDF.com

MC12023 Dataheets PDF



Part Number MC12023
Manufacturers Motorola
Logo Motorola
Description MECL PLL COMPONENTS 64 PRESCALER
Datasheet MC12023 DatasheetMC12023 Datasheet (PDF)

Order this document by MC12023/D 225 MHz Prescaler The MC12023 is a prescaler which will divide by 64. This device may be operated over a supply voltage range of 3.2 to 5.5 V. • 225 MHz Toggle Frequency MC12023 MECL PLL COMPONENTS ÷64 PRESCALER SEMICONDUCTOR TECHNICAL DATA • • • Low-Power 4.8 mA Maximum at 5.5 V Operating Supply Voltage of 3.2 to 5.5 V Connecting Pins 2 and 3 Allows Driving One TTL Load MAXIMUM RATINGS Characteristic Power Supply Voltage Operating Temperature Range Storage .

  MC12023   MC12023



Document
Order this document by MC12023/D 225 MHz Prescaler The MC12023 is a prescaler which will divide by 64. This device may be operated over a supply voltage range of 3.2 to 5.5 V. • 225 MHz Toggle Frequency MC12023 MECL PLL COMPONENTS ÷64 PRESCALER SEMICONDUCTOR TECHNICAL DATA • • • Low-Power 4.8 mA Maximum at 5.5 V Operating Supply Voltage of 3.2 to 5.5 V Connecting Pins 2 and 3 Allows Driving One TTL Load MAXIMUM RATINGS Characteristic Power Supply Voltage Operating Temperature Range Storage Temperature Range NOTE: ESD data available upon request. Symbol VCC TA Tstg Range 0 to 8.0 0 to 70 –65 to 175 Unit Vdc °C °C 8 1 ELECTRICAL CHARACTERISTICS (VCC = 3.2 to 5.5V; TA = 0 to +70°C) Characteristic Toggle Frequency (Sine Wave Input) Supply Current at 5.5 V Output Voltage HIGH1 (VCC = 3.2 V)2 Output Voltage HIGH1 (VCC = 5.0 V)2 Output Voltage LOW1 (Isink = 2.0 mA) Input Voltage Sensitivity 35 MHz 50–225 MHz NOTES: 1. Pin 2 connected to Pin 3 2. Isource = 50 µA 3. VCC = 4.5 V D SUFFIX PLASTIC PACKAGE CASE 751 (SO–8) Symbol fmax fmin ICC VOH VOH VOL Vin Min 225 – – 1.2 2.5 – Typ – – 3.503 1.4 – – Max – 35 4.8 – – 0.5 Unit MHz mA V 8 V V mVPP 1 P SUFFIX PLASTIC PACKAGE CASE 626 400 200 – – 800 800 PIN CONNECTIONS Figure 1. Prescaler Block Diagram To VCC Active Pull-Up ÷64 2 3 Output NC AP Out Gnd 1 2 3 4 8 7 6 5 NC VCC SGnd SIN (Top View) Signal Input Signal Gnd 0.001 µF 5 6 0.001 µF VCC 0.1µF 7 4 Gnd ORDERING INFORMATION Device MC12023D MC12023P Operating Temperature Range TA = 0° to 70°C Package SO–8 Plastic Rev 2 © Motorola, Inc. 1997 MC12023 OUTLINE DIMENSIONS P SUFFIX PLASTIC PACKAGE CASE 626-05 ISSUE K -B1 4 8 5 NOTES: 1. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 2. PACKAGE CONTOUR OPTIONAL (ROUND OR SQUARE CORNERS). 3. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. DIM A B C D F G H J K L M N MILLIMETERS MIN MAX 9.40 10.16 6.60 6.10 4.45 3.94 0.51 0.38 1.78 1.02 2.54 BSC 1.27 0.76 0.30 0.20 3.43 2.92 7.62 BSC — 10° 0.76 1.01 INCHES MIN MAX 0.370 0.400 0.240 0.260 0.155 0.175 0.015 0.020 0.040 0.070 0.100 BSC 0.030 0.050 0.008 0.012 0.115 0.135 0.300 BSC — 10° 0.030 0.040 F NOTE 2 -AL C -TSEATING PLANE J N D H G 0.13 (0.005) M K T A M M B M A 8 D 5 D SUFFIX PLASTIC PACKAGE CASE 751-06 (SO–8) ISSUE T C E 1 4 H 0.25 M B M NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A A1 B C D E e H h L MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.19 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_ h B C e A SEATING PLANE X 45 _ q L 0.10 A1 B 0.25 M C B S A S q Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447 Customer Focus Center: 1–800–521–6274 Mfax™: [email protected] – TOUCH.


MC12017 MC12023 MC12025


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)