DATA SHEET www.onsemi.com
14-Bit Binary Counter and Oscillator
MC14060B
The MC14060B is a 14−stage binary ripple count...
DATA SHEET www.onsemi.com
14-Bit Binary Counter and Oscillator
MC14060B
The MC14060B is a 14−stage binary ripple counter with an on−chip oscillator buffer. The oscillator configuration allows design of either RC or crystal oscillator circuits. Also included on the chip is a reset function which places all outputs into the zero state and disables the oscillator. A negative transition on Clock will advance the counter to the next state. Schmitt trigger action on the input line permits very slow input rise and fall times. Applications include time delay circuits, counter controls, and frequency dividing circuits.
This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high−impedance circuit. For proper operation, Vin and Vout should be constrained to the range VSS ≤ (Vin or Vout) ≤ VDD.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either VSS or VDD). Unused outputs must be left open.
Features
Fully Static Operation Diode Protection on All Inputs Supply Voltage Range = 3.0 V to 18 V Capable of Driving Two Low−power TTL Loads or One Low−power
Schottky TTL Load Over the Rated Temperature Range
Buffered Outputs Available from Stages 4 Through 10 and
12 Through 14
Common Reset Line Pin−for−Pin Replacement for CD4060B These Devices are Pb−Free and are RoHS Complia...