5 CHANNEL ACTUATOR MOTOR DRIVER
MITSUBISHI
M56758FP
5 CHANNEL ACTUATOR MOTOR DRIVER
DESCRIPTION
The M56758FP is a semiconductor ...
Description
MITSUBISHI
M56758FP
5 CHANNEL ACTUATOR MOTOR DRIVER
DESCRIPTION
The M56758FP is a semiconductor integrated circuit designed for a actuator driver used for MD, CD-audio, etc. This device can function 5-channel-actuators by 1 chip due to include 5 channel BTL drivers. Sufficient output dynamic range can be obtained by low supply voltage because saturation voltage of power output is low. All channels include level shift circuit in order that output swings most suitably although reference voltage of signal disposal system in each system becomes 1.5V. And, differential PWM control is possible since all channels are composed of Differential input structure. Also, as this device includes general purpose OP amp, it is suited to wide-ransing application. Further more, this devise is able to power save since it includes mute circuit.
PIN CONFIGURATION (TOP VIEW)
REG+ REGB IN1+ VBS1 Vm1 IN1OUT1 VM1VM1+
1 2 3 4 5 6 7 8 9
42 41 40 39 38 37 36 35 34
CH3IN OUT3 IN3VBS2 Vm2 IN3+ N.C VM3VM3+
M56758FP
FEATURES
q 3.3V DSP available q Low saturation voltage. (Typical 1.35V at load current 0.5A and no bootstrap condition.) Absolute maximum rating of load current: CH1 – 5 500mA A bootstrap function is available. q There are two motor power supplies. Vm1 CH1, 2 motor power supply-1 Vm2 CH3, 4, 5 motor power supply-2 q Built-in OP amp. for Regulator. (Enables Regulator structure by using external PNP Tr. and resistor.) q Flexible Input amp. setting. Enables PWM control....
Similar Datasheet