M62241FP

MITSUBISHI(Standard Linear IC) M62241FP SINGLE CHIP BATTERY CHARGER CONTROL IC DESCRIPTION The M62241FP is designed as 1chip Integrated Circuit for controlling battery charger. This IC contains analog circuits needed for controlling charge, and timesequential-control logic circuits. This IC has various functions such as not only charge-controlling but also battery temperature detection, protection against overcurrent / over-voltage, and safety timer. The combination with some parts gives a charge circuit for Lithium -ion battery easily. PIN configuration (Top view) VCC 1 VDET 2 GND 3 PC 4 BP 5 BN 6 VBOUT 7 TH 8 CHGSW 9 THS 10 IDET 11 ADJ0 12 24 VBIN 23 REFOUT 22 REFIN 21 LED 20 CHG 19 DCJK 18 ADJ3 17 ADJ2 16 ADJ1 15 RC 14 CC 13 PGND FEATURE Designed to operate at as low as 4V CR oscillation circuit for internal logic Terminating timer for preventing overcharge 30min. indicating timer Main output switch drive circuit LED drive circuit (1 system)to indicate charging status System reset circuit for detecting the lowering of supply voltage Temperature detection for Lithium-ion battery Voltage/current control for feedback to the primary side of switching regulator Various protections such as overvoltage detection at charging, overcurrent detection at adaptor connection Outline 24P2Q-A Application VCR with camera, cellular phone, battery charger for general electronic equipments. Block Diagram VCC 1 Power supply voltage detection circuit RC CC 15 14 LED 21 LED driver SW 9...