Mitsubishi Semiconductor < DIGI•ANA Interface >
M62254FP
Standard Battery Charger Controller
DESCRIPTION
The M62254FP ...
Mitsubishi Semiconductor < DIGIANA Interface >
M62254FP
Standard Battery Charger Controller
DESCRIPTION
The M62254FP is designed as standard battery charger controller. The M62254FP has functions which require for the battery charge control on single chip. Not only the combination of M62254 and MCU capable of handling battery charge control, but also it is capable of monitoring battery temperature, prevent from over current or voltage, using minimal peripherals. It also has feedback function to the primary source of SW power supply, which can used to control feedback of charge current and output voltage.
Pin layout(Top view)
1 OP IN1+ OPIN1- 2 LED1 3 LED2 4 LED3 5 P.GND 6 MSW1 7 MSW2 8 SSW 9 CD 10 REF 11 IN1 12 IN2 13 IN3 14 IN4 15 ISENSE 16 DOUT 17 RESET 18 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19
FEATURE
Built-in Reset circuit and WDT function Built-in Multiplexer and Level magnification circuit with 4 input ports Built-in two standard stand alone OPAmp Built-in Sub-switch circuit with feedback function Built-in 3 line serial data interface function Built-in Low inputÅEoutput operation 5V voltage
regulator function Built-in Charge current/output voltage control circuit
OP OUT1 OP OUT2 OP IN2+ OP IN2P.C GND Iadj IDET V DET TC WD Ctd CS CK DI VB Vcc V DD
36P2R
M62254FP
APPLICATIONS
Video camera, Hand carry telephone and general battery charger for other digital equipments
Block diagram
V DET Iadj IDET 28 30 29
Vcc VB V DD 20 21 19
Voltage
regulator Vo...