1510 nm Transmitter Module for Supervisory Channel Applications
PGT 601 06
1510 nm Transmitter Module for Supervisory Channel Applications
Key Features
• Provides 1510 nm supervisory ...
Description
PGT 601 06
1510 nm Transmitter Module for Supervisory Channel Applications
Key Features
Provides 1510 nm supervisory channel laser source for WDM applications according to ITU-T draft G.691 Average power control Small size (40x70x9 mm) CMOS alarm output Thermoelectric cooler included P-ECL data inputs Tone modulation input Single 5.0 V supply
Applications
1510 nm supervisory channel applications in WDM systems
Description
The transmitter module is intended for use at SDH and SONET bit rates. The device meets the intention of the ITU-T (G.691) recommendations. The single silicon IC is used as a laser driver, modulator and automatic power control. To ensure a proper laser operation over the wide temperature range and life of operation, the average optical output power is controlled. The laser bias is externally accessible for monitoring of the performance. A power alarm is activated when the average optical power cannot be maintained within specification. A laser shut-down is also provided according to SDH/ SONET requirements.
1
PGT 601 06
TONE MODULATION
DATA
P-ECL INPUT
OUTPUT DRIVER
LASER PACKAGE
OPTICAL FIBER
LASER SHUT DOWN
LASER SAFETY CIRCUIT
OUTPUT POWER CONTROL
TEMP. CONTROL
OUTPUT POWER ALARM
BIAS MONITOR
TEMP. ALARM & MONITOR
Figure 1. Block diagram
Pin 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28.
Connection NC Laser shut down VCClaser Laser bias current monitor NC NC Las...
Similar Datasheet