Low On-Resistance Wideband/Video Quad with Individual Control
PI5V332
Low On-Resistance Wideband/Video Quad with Individual Control
Features:
• High-performance, low-cost solution to...
Description
PI5V332
Low On-Resistance Wideband/Video Quad with Individual Control
Features:
High-performance, low-cost solution to switch between video sources Wide bandwidth: 250 MHz Low On-Resistance: 3Ω Low crosstalk at 10 MHz: –58 dB Ultra-low quiescent power (0.1µA typical) Single supply operation: +5.0V Fast switching: 10ns High-current output: 100mA Functionally equivalent to QS4A101 Packaging (Pb-free & Green available): – 16-pin 150-mil wide plastic QSOP (Q) – 16-pin 150-mil wide plastic SOIC (W)
Description:
Pericom Semiconductor’s PI5V332 is a true bidirectional Quad Video Switch that is recommended for RGB, S-Video, or composite video switching applications. The individual controls allow for video, Hsync, or Vsync enable or disable. The switch can be driven from a current output RAMDAC or voltage output composite video source. Low On-Resistance and wide bandwidth make it ideal for video and other applications. Also this device has exceptionally high current capability which is far greater than most analog switches offered today. A single 5V supply is all that is required for operation. The PI5V332 offers a high-performance, low-cost solution to switch between video sources.
Block Diagram
SA IN1 SB IN2 SC IN3 SD IN4 DD DC DB DA
Pin Configuration
NIC IN1 SA DA IN2 SB DB GND
1 2 3 4 5 6 7 8
16 15 14 13 12 11 10 9
VCC IN4 SD DD IN3 SC DC NIC
Truth Table
IN1 0 X X X 1 IN2 X 0 X X 1 IN3 X X 0 X 1 IN4 X X X 0 1 Function SA - DA SB - DB SC - DC SD - DD Dis...
Similar Datasheet