PI6C2405A

PI6C2405A Zero-Delay Clock Buffer Features Maximum rated frequency: 133 MHz Low cycle-to-cycle jitter Input to output delay, less than 300ps Internal feedback allows outputs to be synchronized to the clock input 5V tolerant input* Spread spectrum clock ready Operates at 3.3V VDD Packaging (Pb-free & Green available): -8-pin, 150-mil SOIC (W) -8-pin, 173-mil TSSOP (L) Description The PI6C2405A is a PLL based, zero-delay buffer, with the ability to distribute five outputs of up to 133MHz at 3.3V. All the outputs are distributed from a single clock input CLKIN and output OUT0 performs zero delay by connecting a feedback to PLL. An internal feedback on OUT0 is used to synchronize the outputs to the input; the relationship between loading of this signal and the outputs determines the input-output delay. PI6C2405A is able to track spread spectrum clocking for EMI reduction. PI6C2405A is characterized for both commercial and industrial operation. PI6C2405A-1H is a high-drive version of PI6C2405A-1 * CLKIN must reference the same voltage thresholds for the PLL to deliver zero delay skewing Block Diagram Pin Configuration CLKIN PLL OUT0 OUT1 OUT2 OUT3 CLKIN OUT2 OUT1 GND 1 2 3 4 8 7 6 5 OUT0 OUT4 VDD OUT3 PI6C2405A(–1, –1H) OUT4 Pin Description Pin 1 2, 3, 5, 7 4 6 8 Signal CLKIN OUT[1-4] GND VDD OUT0 Description Input clock reference frequency (weak pull-down) Clock Outputs Ground 3.3V Supply Clockoutput, internal PLL feedback (weak pull-down) 1 PS859...