18-Bit Bus-Interface Flip-Flop with 3-State Outputs
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234...
Description
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012
PI74ALVCH16823
18-Bit Bus-Interface Flip-Flop with 3-State Outputs
Product Features
PI74ALVCH16823 is designed for low voltage operation VCC = 2.3V to 3.6V Hysteresis on all inputs Typical VOLP (Output Ground Bounce) < 0.8V at VCC = 3.3V, TA = 25°C Typical VOHV (Output VOH Undershoot) < 2.0V at VCC = 3.3V, TA = 25°C Bus Hold retains last active bus state during 3-STATE, eliminating the need for external pullup resistors Industrial operation at 40°C to +85°C Packages available: 56-pin 240 mil wide plastic TSSOP (A) 56-pin 300 mil wide plastic SSOP (V)
Product Description
Pericom Semiconductors PI74ALVCH series of logic circuits are produced in the Companys advanced 0.5 micron CMOS technology, achieving industry leading speed. The 18-bit PI74ALVCH16823 bus-interface flip-flop is designed for 2.3V to 3.6V VCC operation. It features 3-state outputs designed specifically for driving highly capacitive or relatively lowimpedance loads. This device is particularly suitable for implementing wider buffer registers, I/O ports, bidirectional bus drivers with parity, and working registers. The PI74ALVCH16823 can be used as two 9-bit flip-flops or one 18-bit flip-flop. With the Clock Ena...
Similar Datasheet