DatasheetsPDF.com

PI74LVC3245AL Dataheets PDF



Part Number PI74LVC3245AL
Manufacturers Pericom Semiconductor Corporation
Logo Pericom Semiconductor Corporation
Description 8-Bit Dual Supply Bus Transceiver with 3-State Outputs
Datasheet PI74LVC3245AL DatasheetPI74LVC3245AL Datasheet (PDF)

ADVANCE INFORMATION PI74LVC3245A 8-Bit Dual Supply Bus Transceiver with 3-State Outputs Product Features • • • • 2.7V to 3.6V on A-port and 4.5V to 5.5V on B-port TTL Compatible Inputs Latch-up performance exceeds 200mA Per JESD78 ESD protection exceeds JESD22 2000V Human-Body Model (A114-B) 200V Machine Model (A115-A) • Industrial Temperature: –40°C to +85°C • Available Packages: 24-pin 173-mil wide plastic TSSOP (L) 24-pin 150-mil wide plastic QSOP (Q) 24-pin 300-mil wide plastic SOIC (S) Pr.

  PI74LVC3245AL   PI74LVC3245AL


Document
ADVANCE INFORMATION PI74LVC3245A 8-Bit Dual Supply Bus Transceiver with 3-State Outputs Product Features • • • • 2.7V to 3.6V on A-port and 4.5V to 5.5V on B-port TTL Compatible Inputs Latch-up performance exceeds 200mA Per JESD78 ESD protection exceeds JESD22 2000V Human-Body Model (A114-B) 200V Machine Model (A115-A) • Industrial Temperature: –40°C to +85°C • Available Packages: 24-pin 173-mil wide plastic TSSOP (L) 24-pin 150-mil wide plastic QSOP (Q) 24-pin 300-mil wide plastic SOIC (S) Product Description Pericom Semiconductor’s PI74LVC series of logic circuits are produced using the Company’s advanced submicron CMOS technology, achieving industry leading speed. The PI74LVC3245A is a non-inverting 8-bit Bidirectional Transceiver that uses two seperate power supply rails. A-port (VCCA) is set to operate at 3.3V and B-port (VCCB) is set to operate at 5V. This allows for translation from a 3.3V to a 5Venvironment and vice-versa. This tranceiver is designed for asynchronous two-way communication between data buses. The direction control input pin (DIR) determines the dataflow from the A bus to the B bus or from the B bus to the A bus. The output enable (OE) input, when HIGH, disables both A and B ports by placing them in HIGH Z condition. Logic Block Diagram DIR 2 22 Product Pin Configuration OE (3.3V) VCCA DIR A1 A2 A3 A4 A5 A6 A7 A8 GND GND 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 VCCB (5V) NC OE B1 B2 B3 B4 B5 B6 B7 B8 GND A1 3 A2 4 A3 5 A4 6 A5 7 A6 8 A7 9 A8 10 21 B1 20 B2 19 18 17 16 B3 B4 B5 B6 15 B7 14 B8 Product Pin Description Pin Name OE Outputs DIR Ax Bx NC GND VCCA,VCCB Description 3-State Output Enable Inputs (Active LOW) Direction Control Input Side A Inputs or 3-State Outputs Side B Inputs or 3-State Outputs NO Internal Connect Ground Power Truth Table(1) Inputs OE L L H DIR L H X Bus B Data to Bus A Bus A Data to Bus B Z (Isolation) L = Low Signal Level Z = High Impedance 1 Note: 1. H = High Signal Level X = Don’t Care or Irrelevant P-0.3 08/05/03 ADVANCE INFORMATION PI74LVC3245A 8-Bit Dual Supply Bus Transceiver with 3-State Outputs Maximum Ratings (Above which the useful life may be impaired. For user guidelines, not tested.) Supply voltage range, VCCA and VCCB ............................ –0.5V to +7V Input voltage range, VI(2) : I/O ports (A-port) .... –0.5V to VCCA +0.5V I/O ports (B-port) ........... –0.5V to VCCB+0.5V Control Pins ................. –0.5V to VCCA +0.5V Input clamp current, IIK (VI <0)................................................–50mA Output clamp current, IOK (VO <0)...........................................–50mA Continous Output Current IO ..................................................±50mA Continous Current through each VCC or GND pin .....................±100mA Package thermal impedance, θJA(3): package L...................... 84°C/W package Q...................... 98°C/W package S ...................... 79°C/W Storage Temperature range, Tstg ................................–65°C to 150°C Notes: Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. This value is limited to 7V maximum. 3. The package thermal impedance is calculated in accordance with JESD 51. 2 P-0.3 08/05/03 ADVANCE INFORMATION PI74LVC3245A 8-Bit Dual Supply Bus Transceiver with 3-State Outputs Recommended Operating Conditions(4) Parameters VCCA VCCB VIHA VIHB VILA VILB Description Supply Voltage Supply Voltage High-Level Input Voltage High-Level Input Voltage Low-Level Input Voltage Low-Level Input Voltage High-Level Input Voltage (Control Pins) VOB ≤ 0.1v or VOB ≥ VCCB -0.1V VOA ≤ 0.1V or VOA ≥ VCCA -0.1V VOB ≤ 0.1V or VOB ≥ VCCB -0.1V VOA ≤ 0.1V or VOA ≥ VCCA -0.1V VOA ≤ 0.1V or VOA ≥ VCCA -0.1V, VOB ≤ 0.1V or VOB ≥ VCCB -0.1V VOA ≤ 0.1V or VOA ≥ VCCA -0.1V, VOB ≤ 0.1V or VOB ≥ VCCB -0.1V 2.7V 3.6V 3.3V 3.3V 2.7V 3.6V 3.3V 3.3V 2.7V 3.6V 2.7V 3.6V 5.0V 5.0V 4.5V 5.5V 5.0V 5.0V 4.5V 5.5V 4.5V 5.5V 4.5V 5.5V 0 0 0 0 2.7V 3V 3V 2.7V 3V 3V 4.5V 4.5V 4.5V 4.5V 4.5V 4.5V 2 2 0.8 0.8 VCCA VCCB VCCA VCCB -12 -24 -24 12 24 24 10 -40 85 ns/v ºC mA VCCA VCCB Min. 2.7 4.5 2 2 2 2 0.8 0.8 0.8 0.8 V Typ. 3.3 5 Max. 3.6 5.5 Units VIH VIL VIA VIB VOA VOB IOHA IOHB IOLA IOLB ∆t/∆v TA Low-Level Input Voltage (Control Pins) Input Voltage Input Voltage Output Voltage Output Voltage High-Level Output Current High-Level Output Current Low-Level Output Current Low-Level Output Current Input transition Rise or Fall Rate Operating Free-Air Temp. Note: 4. All unused inputs of the device must be held at the associated VCC or GND to ensure proper device operation. 3 P-0.3 08/05/03 ADVANCE INFORMATION PI74LVC3245A 8-Bit Dual Supply Bus Tr.


PI74LVC3245A PI74LVC3245AL PI74LVC3245AQ


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)