MAX515

19-0280; Rev 2; 11/96 5V, Low-Power, Voltage-Output, Serial 10-Bit DACs _______________General Description The MAX504/MAX515 are low-power, voltage-output, 10-bit digital-to-analog converters (DACs) specified for single +5V power-supply operation. The MAX504 can also be operated with ±5V supplies. The MAX515 draws only 140µA, and the MAX504 (with internal reference) draws only 260µA. The MAX515 comes in 8-pin DIP and SO packages, while the MAX504 comes in 14pin DIP and SO packages. Both parts have been trimmed for offset voltage, gain, and linearity, so no further adjustment is necessary. The MAX515’s buffer is fixed at a gain of 2. The MAX504’s internal op amp may be configured for a gain of 1 or 2, as well as for unipolar or bipolar output voltages. The MAX504 can also be used as a four-quadrant multiplier without external resistors or op amps. For parallel data inputs, see the MAX503 data sheet. For a hardware and software compatible 12-bit upgrade, refer to the MAX531/MAX538/MAX539 data sheet. ___________________________Features o Operate from Single +5V Supply o Buffered Voltage Output o Internal 2.048V Reference (MAX504) o 140µA Supply Current (MAX515) o INL = ±1/2LSB (max) o Guaranteed Monotonic Over Temperature o Flexible Output Ranges: 0V to VDD (MAX504/MAX515) VSS to VDD (MAX504) o 8-Pin SO/DIP (MAX515) o Power-On Reset o Serial Data Output for Daisy-Chaining MAX504/MAX515 ______________Ordering Information PART MAX504CPD MAX504CSD MAX504EPD MAX504ESD MAX515CPA ...