3V/5V / 12-Bit / Serial Voltage-Output Dual DACs
19-2332; Rev 1; 9/03
3V/5V, 12-Bit, Serial Voltage-Output Dual DACs with Internal Reference
General Description
The MAX...
Description
19-2332; Rev 1; 9/03
3V/5V, 12-Bit, Serial Voltage-Output Dual DACs with Internal Reference
General Description
The MAX5230/MAX5231 low-power, dual 12-bit voltageoutput digital-to-analog converters (DACs) feature an internal 3ppm/°C precision bandgap voltage reference and precision output amplifiers. The MAX5231 operates on a single 5V supply with an internal 2.5V reference and features a 4.095V full-scale output range. The MAX5230 operates on a single 3V supply with an internal 1.25V reference and features a 2.0475V full-scale output range. The MAX5231 consumes only 470µA while the MAX5230 consumes only 420µA of supply current. Both devices feature low-power (2µA) software- and hardwareenabled shutdown modes. The MAX5230/MAX5231 feature a 13.5MHz SPI™-, QSPI™-, and MICROWIRE™-compatible 3-wire serial interface. An additional data output (DOUT) allows for daisy-chaining and read back. Each DAC has a doublebuffered digital input. The MAX5230/MAX5231 feature two software-selectable shutdown output impedances: 1kΩ or 200kΩ. A power-up reset feature sets DAC outputs at ground or at the midscale DAC code. The MAX5230/MAX5231 are specified over the extended temperature range (-40°C to +85°C) and are available in 16-pin QSOP packages.
Features
o Internal 3ppm/°C Precision Bandgap Reference 2.465V (MAX5231) 1.234V (MAX5230) o 10ppm/°C (max) Full-Scale Output Range 4.095V (MAX5231) 2.0475V (MAX5230) o Single-Supply Operation 5V (MAX5231) 3V (MAX5230) o Low Supply Current 470µA (MAX5...
Similar Datasheet