DatasheetsPDF.com

MAX5405 Dataheets PDF



Part Number MAX5405
Manufacturers Maxim
Logo Maxim
Description Dual 256-Tap / Low-Drift / Digital Potentiometers
Datasheet MAX5405 DatasheetMAX5405 Datasheet (PDF)

19-1934; Rev 1; 4/01 Dual 256-Tap, Low-Drift, Digital Potentiometers in 10-µMAX General Description The MAX5403/MAX5404/MAX5405 is a family of dual linear taper digital potentiometers. Each device has one 3-terminal potentiometer and one 2-terminal variable resistor (Figure 1). The MAX5403/MAX5404/MAX5405 operate from +2.7V to +5.5V single-supply voltages and use an ultra-low supply current of 0.1µA. These devices also provide glitchless switching between resistors taps as well as a convenient .

  MAX5405   MAX5405



Document
19-1934; Rev 1; 4/01 Dual 256-Tap, Low-Drift, Digital Potentiometers in 10-µMAX General Description The MAX5403/MAX5404/MAX5405 is a family of dual linear taper digital potentiometers. Each device has one 3-terminal potentiometer and one 2-terminal variable resistor (Figure 1). The MAX5403/MAX5404/MAX5405 operate from +2.7V to +5.5V single-supply voltages and use an ultra-low supply current of 0.1µA. These devices also provide glitchless switching between resistors taps as well as a convenient power-on reset (POR) that sets the wiper to the midscale position at power-up. The potentiometer consists of a fixed resistor with a wiper contact that is digitally controlled through a 3-wire serial interface and has 256-tap points. It performs the same function as a discrete potentiometer or variable resistor. These parts are ideal for applications requiring digitally controlled resistors. Three resistance values are available: 10kΩ (MAX5403), 50kΩ (MAX5404), and 100kΩ (MAX5405). A nominal resistor-temperature coefficient of 35ppm/°C end-to-end and 5ppm/°C ratiometric make the MAX5403/MAX5404/MAX5405 ideal for applications requiring low temperature-coefficient variable resistors, such as adjustable-gain circuit configurations. The MAX5403/MAX5404/MAX5405 are available in a 10pin µMAX package. Each device is guaranteed over the extended industrial temperature range (-40°C to +85°C). o 256-Tap Positions o Ultra Low 0.1µA Supply Current o +2.7V to +5.5V Single-Supply Operation o Low End-To-End Temperature Coefficient: 35ppm/°C o Low Ratiometric Temperature Coefficient: 5ppm/°C o Power-On Reset: Wiper Goes to Midscale (Position 128) o Glitchless Switching Between Resistor Taps o 3-Wire SPI™ -Interface Compatible o 10kΩ/50kΩ/100kΩ Resistor Values Features o 10-Pin µMAX Small Footprint Package MAX5403/MAX5404/MAX5405 Applications Mechanical Potentiometer Replacement Low-Drift Programmable Gain Amplifier (PGA) Volume Control LCD Screen Adjustment Adjustable Voltage Reference Programmable Filters, Delays, Time Constant Impedance Matching PART MAX5403EUB MAX5404EUB MAX5405EUB Ordering Information TEMP RANGE -40°C to +85°C -40°C to +85°C -40°C to +85°C PIN-PACKAGE 10 µMAX 10 µMAX 10 µMAX R (kΩ) 10 50 100 Pin Configuration TOP VIEW GND 1 LB HB WB 2 3 4 5 10 LA 9 WA VDD SCLK DIN MAX5403 MAX5404 MAX5405 8 7 6 SPI is a registered trademark of Motorola, Inc. CS µMAX ________________________________________________________________ Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. Dual 256-Tap, Low-Drift, Digital Potentiometers in 10-µMAX MAX5403/MAX5404/MAX5405 ABSOLUTE MAXIMUM RATINGS VDD to GND ..............................................................-0.3V to +6V DIN, SCLK, CS .........................................................-0.3V to +6V HX, LX, WX to GND .......................................-0.3V to (VDD + 0.3) Maximum Continuous Current Into HX, LX, and WX ...........±1mA Continuous Power Dissipation (TA = +70°C) 10-Pin µMAX (derate 5.6mW/°C above +70°C) ...........444mW Operating Temperature Range ...........................-40°C to +85°C Junction Temperature ......................................................+150°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature (soldering, 10s) .................................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (VDD = +5V, unless otherwise noted. VH = VDD, VL = 0, TA = TMIN to TMAX. Typical values are at VDD = +5V, TA = +25°C, unless otherwise noted.) PARAMETER Resolution Integral Nonlinearity (Notes 1, 2) Differential Nonlinearity (Notes 1, 2) End-to-End Resistor Tempco Ratiometric Resistor Tempco Full-Scale Error Zero-Scale Error Full-Scale Error Zero-Scale Error Full-Scale Error Zero-Scale Error DC PERFORMANCE (Variable Resistor Mode) Resolution N MAX5403 (Pot A) VDD = +5V Integral Nonlinearity (Notes 1, 3) INL MAX5403 (Pot B) MAX5404 MAX5405 MAX5403 (Pot A) VDD = +3V MAX5403 (Pot B) MAX5404 MAX5405 Differential Nonlinearity (Notes 1, 3) DNL VDD = +5V VDD = +3V VDD = +5V VDD = +3V MAX5403 MAX5404/MAX5405 50 30 275 550 8 ±2.5 ±1 ±1 ±1 ±4.5 ±3 ±1.5 ±1.5 ±1/2 LSB LSB Bits MAX5403 MAX5403 MAX5404 MAX5404 MAX5405 MAX5405 SYMBOL N INL DNL TCR 35 5 -8 +8 -1.6 +1.6 -0.8 +0.8 CONDITIONS MIN 8 ±1/2 ±1/2 TYP MAX UNITS Bits LSB LSB ppm/°C ppm/°C LSB LSB LSB LSB LSB LSB DC PERFORMANCE (Voltage Divider Mode) DC PERFORMANCE (Resistor Characteristics) Wiper Resistance (Note 4) Wiper Capacitance RW CW Ω pF 2 ________.


MAX5404 MAX5405 MAX5407


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)