MDF12A-TA1416HC

Crimping Contact Directly Mounted on Board MDF12,MDF27 Series sFeatures 1. Cable Direct Mounting Service Improved The existing cable core soldered directly on the board is remade into the crimping contact, which can enhance the service efficiency and the reliability. q Achieves pre-soldering fixation according to the board pre-fixed style, and enhances the service efficiency. q Accepts a load to the cable at the contact, and prevents contact wire cutting. 2. Cable Lateral Unreeling Possible The cable can be unreeled lateral to the board by using the angle type MDF27. 3. Current Capacity Secured Corresponding to Thick Cable The cable size corresponds to AWG22 to 14, while AWG14 secures 15A current capacity. In addition, since the contacts are provided corresponding to UL1007 and UL1015 jackets, the contact can be chosen according to applications. sApplications Various kinds of electronic equipment power supplies, etc. B194 sProduct Specifications Current rating Note 1 Rating AWG 14 : 15A AWG 16 : 10A AWG 18 : 9A AWG 20 : 5A AWG 22 : 5A Voltage rating Item 1. Contact Resistance 2. Vibration 4. Temperature Cycle 5. Resistance to Soldering heat 15m ohms max. No damage, cracks, or parts looseness. No damage, cracks, or parts looseness. No deformation of components affecting performance. Specification 100mA Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% (-55ç: 30 minutes-> 5 t...