Document
ME701203 ME701603
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
Three-Phase Diode Bridge Modules
30 Amperes/1200-1600 Volts
F
+
K
K
K
E H
-
J M D
L - DIA. (2 TYP.)
B A
.250 TAB DC OUTPUT TERMINAL AC INPUT TERMINAL
G
C N
Description: Powerex Three-Phase Diode Bridge Modules are designed for use in three-phase bridge application. The modules are isolated consisting of six rectifier diodes. These ME70 Modules have been tested and recognized by Underwriters Laboratories (QQQX2 Power Switching Semiconductors).
ME701203, ME701603 Three-Phase Diode Bridge Modules 30 Amperes/1200-1600 Volts
Features: M Isolated Mounting M Planar Chips M UL Recognized
Outline Drawing
Dimension A B C D E F G H J K L M N Inches 3.150 2.677±0.012 1.220 1.181 1.142 0.866 0.728 0.512 0.492 R 0.472 0.118 0.079 Millimeters 80 68±0.3 31 30 29 22 18.5 13 R12.5 12
Applications: M Inverters M DC Power Supplies M AC Motor Control Front End Ordering Information: Select the complete eight digit module part number you desire from the table below. Example: ME701603 is a 1600 Volt, 30 Ampere ThreePhase Diode Bridge Module.
Type ME70 Voltage Volts (x100) 12 16 Current Rating Amperes (x10) 03
0.256±0.008 Dia. Dia. 6.5±0.2 3 2
D-63
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 ME701203, ME701603 Three-Phase Diode Bridge Modules 30 Amperes/1200-1600 Volts
Absolute Maximum Ratings
Characteristics Peak Reverse Blocking Voltage Transient Peak Reverse Blocking Voltage (Non-Repetitive), t < 5ms DC Reverse Blocking Voltage DC Output Current, TC = 103°C Peak One-Cycle Surge (Non-Repetitive) On-State Current (60Hz) Peak One-Cycle Surge (Non-Repetitive) On-State Current (50Hz) I2t (for Fusing), 8.3 milliseconds Storage Temperature Operating Temperature Maximum Mounting Torque M6 Mounting Screw Module Weight (Typical) V Isolation Symbol VRRM VRSM VR(DC) IO IFSM IFSM I2t TSTG Tj — — VRMS ME701203 1200 1350 960 30 300 275 375 -40 to 125 -40 to 150 26 120 2500 ME701603 1600 1700 1280 30 300 275 375 -40 to 125 -40 to 125 26 120 2500 Units Volts Volts Volts Amperes Amperes Amperes A2sec °C °C in.-lb. Grams Volts
D-64
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 ME701203, ME701603 Three-Phase Diode Bridge Modules 30 Amperes/1200-1600 Volts
Electrical and Thermal Characteristics, Tj = 25°C unless otherwise specified
Characteristics Blocking State Maximums Reverse Leakage Current, Peak Conducting State Maximums Peak On-State Voltage Thermal Maximums Thermal Resistance, Junction-to-Case Thermal Resistance, Case-to-Sink (Lubricated) Symbol IRRM VFM R(J-C) R(C-S) Test Conditions Tj = 150°C, VRRM = Rated IFM = 30A Per Module Per Module ME701203/ME701603 2.0 1.25 0.7 0.1 Units mA Volts °C/Watt °C/Watt
D-65
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 ME701203, ME701603 Three-Phase Diode Bridge Modules 30 Amperes/1200-1600 Volts
MAXIMUM ON-STATE CHARACTERISTICS
INSTANTANEOUS ON-STATE VOLTAGE, VFM, (VOLTS)
MAXIMUM ALLOWABLE PEAK SURGE (NON-REPETITIVE) CURRENT
MAXIMUM ALLOWABLE CASE TEMPERATURE, TC, (oC)
MAXIMUM ALLOWABLE CASE TEMPERATURE
2.6
MAXIMUM PEAK SURGE (NON-REPETITIVE) CURRENT, IFSM, (AMPERES)
500
Tj = 25oC
160
2.2
400
140
1.8
300
120
1.4
200
100
1.0
100
80
0.6 100 101 102 103
INSTANTANEOUS ON-STATE CURRENT, IFM, (AMPERES)
0 100 101
CYCLES AT 60 HZ
60 0 10 20 30 40 50
DC OUTPUT CURRENT, IO, (AMPERES)
102
MAXIMUM ON-STATE POWER DISSIPATION
MAXIMUM POWER DISSIPATION, PAV(MAX), (WATTS)
80 70 60 50 40 30 20 10 0 0 10 20 30 40
DC OUTPUT CURRENT, IO, (AMPERES)
RESISTIVE INDUCTIVE LOAD
D-66
.