Datacom / Telecom / General Purpose LED
MF431 Datacom, Telecom, General Purpose LED
MF431 ST
Applications
• FDDI • ATM-SDH/SONET 155Mbps • Intra-Office Teleco...
Description
MF431 Datacom, Telecom, General Purpose LED
MF431 ST
Applications
FDDI ATM-SDH/SONET 155Mbps Intra-Office Telecommunications General Purpose
Description
This LED is designed for Datacom, Telecom and General Purpose Applications. It has a long wavelength LED for links up to 10 km at 125Mbps. It meets standards for FDDI (ANSI X3T9.5) and ATM155Mbps. The device is optimized for 62.5/125µm fiber and actively aligned in an ST® receptacle. The MF432 PIN Photodiode is recommended as Receiver for this LED.
Features
ST Assembly 1320nm Surface-Emitting LED 125MHz Bandwidth Designed for 62.5/125µm Fiber Aligned in ST® Receptacle MTTF >1,000,000 hours
Ordering Information
PART # RECEPTACLE
MF431 ST ST -40°C to +85°C
MF431 Functional Diagram
FIBER
ANODE CASE
DETECTOR
CATHODE BOTTOM VIEW
MF431 LED
13324.11 1997-04-01
10
Datacom, Telecom, General Purpose LED MF431
Absolute Maximum Ratings* Parameter
Storage Temperature Operating Temperature (Fig 4) Electrical Power Dissipation (Fig 4) Continuous Forward Current (f≤10kHz) Peak Forward Current (duty cycle ≤50%, f≥1MHz) Reverse Voltage Soldering Temperature (Note 1)
Symbol
Tstg Top Ptot IF IFRM VR Tsld
Min.
-40 -40
Max.
+85 +85 160 80 130 0.5 260
Units
°C °C mW mA mA V °C
*Exceeding these values may cause permanent damage. Functional operation under these conditions is not implied. Note 1: 2mm from the case for 10s.
Optical & Electrical Characteristics (Case Temperature -25 to +70˚C)
Parameter Fiber-Coupl...
Similar Datasheet