Part Number

MAX742

Description

Switch-Mode Regulator with +5V to 12V or 15V Dual Output

Manufacture

Maxim

Total Page 12 Pages
PDF Download
Download MAX742 Datasheet PDF


Features Datasheet pdf 19-3105; Rev 2; 8/96 NUAL KIT MA ATION EET H S A EVALU T WS DA FOLLO Switch-M ode Regulator with +5V to ±12V or ±15 V Dual Output _________________________ ___Features o Specs Guaranteed for In-C ircuit Performance o Load Currents to 2A o 4.2V to 10V Input-Voltage Range o Switches From ±15V to ±12V Under Log ic Control o ±4% Output Tolerance Max Over Temp, Line, and Load o 90% Typ Eff iciency o o o o Low-Noise, Current-Mode Feedback Cycle-by-Cycle Current Limiti ng Undervoltage Lockout and Soft-Start 100kHz or 200kHz Operation ___________ ____General Description The MAX742 DC-D C converter is a controller for dual-ou tput power supplies in the 3W to 60W ra nge. Relying on simple two-terminal induct.
Keywords MAX742, datasheet, pdf, Maxim, Switch-Mode, Regulator, with, +5V, to, 12V, or, 15V, Dual, Output, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent

MAX742 Datasheet
19-3105; Rev 2; 8/96
EVFAOLLULAOTWIOSNDKAITTAMSAHNEUEATL
Switch-Mode Regulator with
+5V to ±12V or ±15V Dual Output
_______________General Description
The MAX742 DC-DC converter is a controller for dual-out-
put power supplies in the 3W to 60W range. Relying on
simple two-terminal inductors rather than transformers, the
MAX742 regulates both outputs independently to within
±4% over all conditions of line voltage, temperature, and
load current.
The MAX742 has high efficiency (up to 92%) over a wide
range of output loading. Two independent PWM current-
mode feedback loops provide tight regulation and opera-
tion free from subharmonic noise. The MAX742 can
operate at 100kHz or 200kHz, so it can be used with small
and lightweight external components. Also ripple and
noise are easy to filter. The MAX742 provides a regulated
output for inputs ranging from 4.2V to 10V (and higher with
additional components).
External power MOSFETs driven directly from the MAX742
are protected by cycle-by-cycle overcurrent sensing. The
MAX742 also features undervoltage lockout, thermal shut-
down, and programmable soft-start.
If 3W of load power or less is needed, refer to the MAX743
data sheet for a device with internal power MOSFETs.
________________________Applications
DC-DC Converter Module Replacement
Distributed Power Systems
Computer Peripherals
__________________Pin Configuration
TOP VIEW
FB+ 1
CC+ 2
AGND 3
AV 4
100/200 5
12/15 6
VREF 7
SS 8
CC- 9
FB- 10
MAX742
20 CSH+
19 CSL+
18 GND
17 EXT+
16 PUMP
15 PDRV
14 EXT-
13 V+
12 CSH-
11 CSL-
DIP/SO
____________________________Features
o Specs Guaranteed for In-Circuit Performance
o Load Currents to ±2A
o 4.2V to 10V Input-Voltage Range
o Switches From ±15V to ±12V Under Logic Control
o ±4% Output Tolerance Max Over Temp, Line,
and Load
o 90% Typ Efficiency
o Low-Noise, Current-Mode Feedback
o Cycle-by-Cycle Current Limiting
o Undervoltage Lockout and Soft-Start
o 100kHz or 200kHz Operation
______________Ordering Information
PART
TEMP. RANGE
MAX742CPP
0°C to +70°C
MAX742CWP
0°C to +70°C
MAX742C/D
0°C to +70°C
MAX742EPP
-40°C to +85°C
MAX742EWP
-40°C to +85°C
MAX742MJP
-55°C to +125°C
* Contact factory for dice specifications
PIN-PACKAGE
20 Plastic DIP
20 Wide SO
Dice*
20 Plastic DIP
20 Wide SO
20 CERDIP
__________Simplified Block Diagram
MAX742
CC-
+5V
INPUT
+2.0V
VREF
CC+
R -SENSE
PWM
S -DRIVE
OSC
S +DRIVE
PWM
R +SENSE
P
N
-VO
+VO
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)