2A / Current-Limited / High-Side P-Channel Switch with Thermal Shutdown
|Total Page||8 Pages|
|Features||Datasheet pdf 19-1278; Rev 0; 8/97 2A, Current-Limite d, High-Side P-Channel Switch with Ther mal Shutdown _______________General Des cription The MAX869L P-channel load swi tch features an accurate user-set curre nt limit and low on-resistance. This sw itch is designed to protect your power source from shorts and surges by limiti ng current and preventing the system su pply from being pulled low. The input v oltage range is 2.7V to 5.5V. The MAX86 9L features a 2A, 45mΩ switch control led by a logic signal. Current-limit ac curacy is ±21%, and can be set from 40 0mA to 2.4A using a single resistor. Th e device has a low 12µA quiescent supp ly current, which reduces to 2µA max i n shutdown. It features thermal-shutdown .|
|Keywords||MAX892L, datasheet, pdf, Maxim, 2A, /, Current-Limited, /, High-Side, P-Channel, Switch, with, Thermal, Shutdown, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent|
19-1278; Rev 0; 8/97
2A, Current-Limited, High-Side
P-Channel Switch with Thermal Shutdown
The MAX869L P-channel load switch features an accu-
rate user-set current limit and low on-resistance. This
switch is designed to protect your power source from
shorts and surges by limiting current and preventing
the system supply from being pulled low. The input volt-
age range is 2.7V to 5.5V.
The MAX869L features a 2A, 45mΩ switch controlled
by a logic signal. Current-limit accuracy is ±21%, and
can be set from 400mA to 2.4A using a single resistor.
The device has a low 12µA quiescent supply current,
which reduces to 2µA max in shutdown. It features ther-
mal-shutdown protection and a logic-signal output pin
(FAULT) that signals when there is an overcurrent or
For other devices in this family, consult the Selector
o Very Small Footprint (16-pin QSOP is the same
size as an 8-pin SO)
o Low Resistance: 45mΩ at 3V
o ±21%-Accurate, User-Set Current Limit
o 12µA (typ) Quiescent Current
o 0.01µA (typ) Shutdown Current
o 0.04µA (typ) Leakage to Output when Switch
o 2.7V to 5.5V Input Range
o Thermal Shutdown
o FAULT Output
0°C to +70°C
-40°C to +85°C
*Dice are specified at TA = +25°C.
__________Typical Operating Circuit
Universal Serial Bus (USB)
Portable Medical Instruments
2.7V TO 5.5V
UP TO 2A
Pin Configuration appears at end of data sheet.
*FOR USB APPLICATIONS, CIN = 1µF, COUT = 120µF
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 408-737-7600 ext. 3468.