DatasheetsPDF.com

MAX9005 Dataheets PDF



Part Number MAX9005
Manufacturers Maxim
Logo Maxim
Description Low-Power / High-Speed / Single-Supply Op Amp + Comparator + Reference ICs
Datasheet MAX9005 DatasheetMAX9005 Datasheet (PDF)

19-0499; Rev 1; 7/98 Low-Power, High-Speed, Single-Supply Op Amp + Comparator + Reference ICs General Description The MAX9000 family features the combination of a highspeed operational amplifier, a 185ns comparator, and a precision 1.230V reference. These devices operate from a single +2.5V to +5.5V supply and draw less than 500µA of quiescent current. The MAX9001/MAX9004 feature a shutdown mode that reduces supply current to 2µA and puts the outputs into a high-impedance state, making them ide.

  MAX9005   MAX9005


Document
19-0499; Rev 1; 7/98 Low-Power, High-Speed, Single-Supply Op Amp + Comparator + Reference ICs General Description The MAX9000 family features the combination of a highspeed operational amplifier, a 185ns comparator, and a precision 1.230V reference. These devices operate from a single +2.5V to +5.5V supply and draw less than 500µA of quiescent current. The MAX9001/MAX9004 feature a shutdown mode that reduces supply current to 2µA and puts the outputs into a high-impedance state, making them ideal for portable and battery-powered applications. The amplifiers in the MAX9000/MAX9001/MAX9002 are unity-gain stable with a 1.25MHz gain-bandwidth product, while the amplifiers in the MAX9003/MAX9004/MAX9005 are stable for closed-loop gains of +10V/V or greater with an 8MHz gain-bandwidth product. The input commonmode voltage extends from 150mV below the negative supply to within 1.2V of the positive supply for the amplifier, and to within 1.1V for the comparator. The amplifier and comparator outputs can swing Rail-to-Rail® and deliver up to ±2.5mA and ±4.0mA, respectively, to an external load while maintaining excellent DC accuracy. The unique design of the comparator output stage substantially reduces switching current during output transitions, virtually eliminating power-supply glitches. The comparator’s ±2mV of built-in hysteresis provides noise immunity and prevents oscillations even with a slow-moving input signal. The MAX9000/MAX9001/ MAX9003/MAX9004 have an internal 1.230V ±1% precision reference with a low 8ppm/°C temperature coefficient that can sink or source up to 1mA. The amplifier and reference are stable with capacitive loads up to 250pF and 100nF, respectively. The comparator’s inverting input is internally connected to the reference output in the MAX9000/MAX9003. Features o Op Amp + Comparator + Reference in Space-Saving µMAX Package o +2.5V to +5.5V Single-Supply Voltage Range o 340µA Supply Current (MAX9002/MAX9005) o Unity-Gain Stable (GBW = 1.25MHz) and Decompensated (AV ≥ 10V/V, GBW = 8MHz) Options o Op-Amp/Comparator Outputs Swing Rail-to-Rail o Ground-Sensing Inputs for Both Op Amp and Comparator o Op Amp Stable with Capacitive Loads up to 250pF o Internal ±2mV Comparator Hysteresis o Fast 185ns Propagation-Delay Comparator o No Phase Reversal for Overdriven Inputs (Both Op Amp and Comparator) o Internal 1.230V Precision Reference (MAX9000/ MAX9001/MAX9003/MAX9004) ±1% Initial Accuracy Low 8ppm/°C Temperature Drift Sink or Source up to 1mA Stable for Capacitive Loads up to 100nF MAX9000–MAX9005 Ordering Information PART MAX9000EUA MAX9000ESA MAX9001EUB MAX9001ESD TEMP. RANGE -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C PIN-PACKAGE 8 µMAX 8 SO 10 µMAX 14 SO ________________________Applications Single-Supply ZeroCrossing Detector Instruments, Terminals, and Bar-Code Readers Keyless Entry Photodiode Preamps Smart Card Readers Infrared Receivers for Remote Controls Sensor Signal Detection Ordering Information continued at end of data sheet. Pin Configurations and Typical Operating Circuit appear at end of data sheet. Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd. ______________________________________________________________________________Selector Guide PART MAX9000 MAX9001 MAX9002 MAX9003 MAX9004 MAX9005 INTERNAL PRECISION REFERENCE Yes Yes No Yes Yes No OP-AMP GAIN STABILITY (V/V) 1 1 1 10 10 10 SHUTDOWN No Yes No No Yes No OP-AMP GAIN BANDWIDTH (MHz) 1.25 1.25 1.25 8 8 8 PIN-PACKAGE 8 SO/µMAX 10 µMAX, 14 SO 8 SO/µMAX 8 SO/µMAX 10 µMAX, 14 SO 8 SO/µMAX 1 ________________________________________________________________ Maxim Integrated Products For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800. For small orders, phone 408-737-7600 ext. 3468. Low-Power, High-Speed, Single-Supply Op Amp + Comparator + Reference ICs MAX9000–MAX9005 ABSOLUTE MAXIMUM RATINGS Supply Voltage (VDD to VSS) ....................................-0.3V to +6V Voltage Inputs (AIN_, CIN_).............(VSS - 0.3V) to (VDD + 0.3V) Output Short-Circuit Duration (AOUT, COUT, REF) ...Continuous to either VSS or VDD Continuous Power Dissipation (TA = +70°C) 8-Pin SO (derate 5.88mW/°C above +70°C).................471mW 8-Pin µMAX (derate 4.1mW/°C above +70°C) ..............330mW 10-Pin µMAX (derate 5.6mW/°C above +70°C) ............444mW 14-Pin SO (derate 8.3mW/°C above +70°C).................667mW Operating Temperature Range MAX900_E _ _...................................................-40°C to +85°C Maximum Junction Temperature .....................................+150°C Storage Temperature Range .............................-65°C to +160°C Lead Temperature (soldering, 10sec) .............................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the oper.


MAX9004 MAX9005 MAX901


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)