Line Receivers. MAX9113 Datasheet

MAX9113 Datasheet PDF, Equivalent


Part Number

MAX9113

Description

Single/Dual LVDS Line Receivers

Manufacture

Maxim

Total Page 10 Pages
PDF Download
Download MAX9113 Datasheet


MAX9113 Datasheet
19-1803; Rev 3; 3/09
Single/Dual LVDS Line Receivers with
Ultra-Low Pulse Skew in SOT23
General Description
The MAX9111/MAX9113 single/dual low-voltage differen-
tial signaling (LVDS) receivers are designed for high-
speed applications requiring minimum power
consumption, space, and noise. Both devices support
switching rates exceeding 500Mbps while operating from
a single +3.3V supply, and feature ultra-low 300ps (max)
pulse skew required for high-resolution imaging applica-
tions such as laser printers and digital copiers.
The MAX9111 is a single LVDS receiver, and the
MAX9113 is a dual LVDS receiver.
Both devices conform to the EIA/TIA-644 LVDS standard
and convert LVDS to LVTTL/CMOS-compatible outputs.
A fail-safe feature sets the outputs high when the inputs
are undriven and open, terminated, or shorted. The
MAX9111/MAX9113 are available in space-saving 8-pin
SOT23 and SO packages. Refer to the MAX9110/
MAX9112 data sheet for single/dual LVDS line drivers.
Features
o Low 300ps (max) Pulse Skew for High-Resolution
Imaging and High-Speed Interconnect
o Space-Saving 8-Pin SOT23 and SO Packages
o Pin-Compatible Upgrades to DS90LV018A and
DS90LV028A (SO Packages Only)
o Guaranteed 500Mbps Data Rate
o Low 29mW Power Dissipation at 3.3V
o Conform to EIA/TIA-644 Standard
o Single +3.3V Supply
o Flow-Through Pinout Simplifies PCB Layout
o Fail-Safe Circuit Sets Output High for Undriven
Inputs
o High-Impedance LVDS Inputs when Powered Off
Ordering Information
________________________Applications
Laser Printers
Network Switches/Routers
Digital Copiers
LCD Displays
PART
MAX9111EKA
MAX9111ESA
TEMP
RANGE
-40°C to +85°C
-40°C to +85°C
PIN-
PACKAGE
8 SOT23
8 SO
TOP
MARK
AAEE
Cellular Phone
Base Stations
Telecom Switching
Equipment
Backplane Interconnect
Clock Distribution
MAX9113EKA
-40°C to +85°C 8 SOT23
MAX9113ESA
-40°C to +85°C 8 SO
MAX9113ASA/V+ -40°C to +125°C 8 SO
/V denotes an automotive qualified part.
+Denotes a lead(Pb)-free/RoHS-compliant package.
AAED
Typical Operating Circuit appears at end of data sheet.
Pin Configurations/Functional Diagrams/Truth Table
MAX9111
MAX9111
MAX9113
MAX9113
IN- 1
IN+ 2
N.C. 3
N.C. 4
8 VCC VCC 1
7 OUT GND 2
6 N.C. OUT 3
5 GND N.C. 4
MAX9111
8 IN- IN1- 1
7 IN+ IN1+ 2
6 N.C. IN2+ 3
5 N.C. IN2- 4
8 VCC VCC 1
7 OUT1 GND 2
6 OUT2 OUT1 3
5 GND OUT2 4
8 IN1-
7 IN1+
6 IN2+
5 IN2-
SO
SOT23
SO
SOT23
(IN_+) - (IN_-)
100mV
-100mV
OPEN
SHORT
100Ω PARALLEL TERMINATION (UNDRIVEN)
OUT_
H
L
H
H
H
H = LOGIC LEVEL HIGH
L = LOGIC LEVEL LOW
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim's website at www.maxim-ic.com.

MAX9113 Datasheet
Single/Dual LVDS Line Receivers with
Ultra-Low Pulse Skew in SOT23
ABSOLUTE MAXIMUM RATINGS
VCC to GND ..............................................................-0.3V to +4V
IN_ _ to GND .........................................................-0.3V to +3.9V
OUT_ _ to GND...........................................-0.3V to (VCC + 0.3V)
ESD Protection All Pins
(Human Body Model, IN_+, IN_-) ..................................±11kV
Continuous Power Dissipation (TA = +70°C)
8-Pin SOT23 (derate 8.9mW/°C above +70°C)............714mW
8-Pin SO (derate 5.88mW°C above +70°C).................471mW
Operating Temperature Ranges
MAX911_E .......................................................-40°C to +85°C
MAX911_A .....................................................-40°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VCC = +3.0V to +3.6V, magnitude of input voltage, |VID| = +0.1V to +1.0V, VCM = |VID|/2 to (2.4V - (|VID|/2)), TA = TMIN to TMAX.
Typical values are at VCC = +3.3V and TA = +25°C, unless otherwise noted.) (Notes 1, 2)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Differential Input High Threshold
(Note 3)
VTH
VCM = 0.05V, 1.2V, 2.75V at 3.3V
100 mV
Differential Input Low Threshold
(Note 3)
VTL VCM = 0.05V, 1.2V, 2.75V at 3.3V
-100
mV
Differential Input Resistance
Output High Voltage (OUT_)
RDIFF
VOH
VCM = 0.2V or 2.2V, VID = ±0.4V,
VCC = 0 or 3.6V
VID = +200mV
IOH = -4mA
Inputs shorted,
undriven
100Ω parallel
termination,
undriven
5 18
2.7
2.7
2.7
kΩ
V
Output Low Voltage (OUT_)
Output Short-Circuit Current
No-Load Supply Current
VOL IOL = 4mA, VID = -200mV
IOS VID = +200mV, VOUT_ = 0
MAX9111
ICC MAX9113
0.4
-100
mA
4.2 6
mA
8.7 11
2 _______________________________________________________________________________________


Features Datasheet pdf 19-4802; Rev 0; 7/00 Single/Dual LVDS L ine Receivers with Ultra-Low Pulse Skew in SOT23 General Description The MAX91 11/MAX9113 single/dual low-voltage diff erential signaling (LVDS) receivers are designed for highspeed applications re quiring minimum power consumption, spac e, and noise. Both devices support swit ching rates exceeding 500Mbps while ope rating from a single +3.3V supply, and feature ultra-low 300ps (max) pulse ske w required for high-resolution imaging applications such as laser printers and digital copiers. The MAX9111 is a sing le LVDS receiver, and the MAX9113 is a dual LVDS receiver. Both devices confor m to the EIA/TIA-644 LVDS standard and convert LVDS to LVTTL/CMOS-compatible o utputs. A fail-safe feature sets the ou tputs high when the inputs are undriven and open, terminated, or shorted. The MAX9111/MAX9113 are available in space- saving 8-pin SOT23 and SO packages. Ref er to the MAX9110/ MAX9112 data sheet f or single/dual LVDS line drivers. Features o Low 300ps (max) P.
Keywords MAX9113, datasheet, pdf, Maxim, Single/Dual, LVDS, Line, Receivers, AX9113, X9113, 9113, MAX911, MAX91, MAX9, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)