VOLTAGE REGULATORS. 78M05 Datasheet
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
Output Current of 0.5 A, Three-Terminal Positive Voltage Regulators
5 V, 6 V, 8 V, 9 V, 10 V, 12 V, 15 V, 18 V, 20 V, 24 V
z Suitable for CMOS, TTL and the power supply of the other
z Internal overheating protection.
z Internal overcurrent protection.
z Maximum output current of 0.5 A.
z Packaged in New PW-Mold (Surface-mount type).
HSOP3-P-2.30D: 0.36 g (typ.)
Note 1: A line under a Lot No. identifies the indication of product
Product No. (or abbreviation code)
Not underlined: [[Pb]]/INCLUDES > MCV
Underlined: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Please contact your TOSHIBA sales representative for details as to
environmental matters such as the RoHS compatibility of Product.
The RoHS is the Directive 2002/95/EC of the European Parliament
and of the Council of 27 January 2003 on the restriction of the use of
certain hazardous substances in electrical and electronic equipment.
Note 2: The “**” part of each product number varies according to the output voltage of the product.
Package (Lead Type)
TA78M**F (TE16L1, NQ New PW-Mold: Surface-mount Tape (2000 pcs./reel)
Note: The “**” in each pro-forma product name is replaced with the output voltage of each product.
The product(s) in this document (“Product”) contain functions intended to protect the Product from temporary
small overloads such as minor short-term overcurrent or overheating. The protective functions do not
necessarily protect Product under all circumstances. When incorporating Product into your system, please
design the system (1) to avoid such overloads upon the Product, and (2) to shut down or otherwise relieve the
Product of such overload conditions immediately upon occurrence. For details, please refer to the notes
appearing below in this document and other documents referenced in this document.
Absolute Maximum Ratings (Ta = 25°C)
(Ta = 25°C)
(Tc = 25°C)
Operating junction temperature
−30 to 150
−55 to 150
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).