CXN1010

CXN1010 Bluetooth R Module Description The CXN1010 is a fully integrated Class 2 radio and baseband module conforming to ver. 1.1 of the Bluetooth R specification. Features UART, USB, PCM codec, PIO, and AIO interfaces, enabling a wide range of applications. Small package: 10 × 14 × 1.5mm 8M-bit on-module flash memory Voltage regulator options: either on-module or external 1.8V regulator supported Based on the CXD3251GL, fully compatible with the Bluecore2-EXT from CSR Support for up to 7 slaves from a single master Channel quality driven data rate General Specifications Product name: Bluetooth R module Antenna connector impedance: 50Ω External interfaces: UART, USB, PCM, PIO, AIO Supply voltage: 2.3 to 3.6V∗ Package dimensions: 10.0 × 14.0 × 1.5mm ∗ An external 1.75 +0.15 V power supply is required for modules without internal voltage regulator (customer option). –0.05 Bluetooth R is a trademark owned by Bluetooth SIG, Inc. and licensed to Sony. Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits. –1– E03Y34A53 CXN1010 Block Diagram VDD: 1.8V VDD: 3V [Option 2] Regulator VDD: 1.8V VDD: 3V TX ANT BPF Balun RX Flash ...