HEX BUS BUFFER
M74HCT367
HEX BUS BUFFER WITH 3 STATE OUTPUT NON INVERTING
s HIGH SPEED:
tPD = 14ns (TYP.) at VCC = 4.5V
s LOW POWER ...
Description
M74HCT367
HEX BUS BUFFER WITH 3 STATE OUTPUT NON INVERTING
s HIGH SPEED:
tPD = 14ns (TYP.) at VCC = 4.5V
s LOW POWER DISSIPATION:
ICC = 4µA(MAX.) at TA=25°C
s COMPATIBLE WITH TTL OUTPUTS :
)VIH = 2V (MIN.) VIL = 0.8V (MAX) t(ss SYMMETRICAL OUTPUT IMPEDANCE:
|IOH| = IOL = 6mA (MIN)
ucs BALANCED PROPAGATION DELAYS: dtPLH ≅ tPHL ros PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 367
te PDESCRIPTION leThe M74HCT367 is an high speed CMOS HEX oBUS BUFFER 3-STATE OUTPUTS fabricated swith silicon gate C2MOS technology. bThis device contains six buffers, four buffers are Ocontrolled by an enable input (G1) and the other -two buffers are controlled by the other enable )input (G2); the outputs of each buffer group are t(senabled when G1 and/or G2 inputs are held low,
DIP
SOP
TSSOP
ORDER CODES
PACKAGE
TUBE
T&R
DIP SOP TSSOP
M74HCT367B1R M74HCT367M1R M74HCT367RM13TR
M74HCT367TTR
and when held high, these outputs are disabled in a high-impedance state. All inputs are equipped with protection circuits against static discharge and transient excess voltage.
Obsolete ProducPIN CONNECTION AND IEC LOGIC SYMBOLS
September 2001
1/9
M74HCT367
INPUT AND OUTPUT EQUIVALENT CIRCUIT
PIN DESCRIPTION
PIN No
1, 15
2, 4, 6, 10, 12, 14
3, 5, 7, 9, 11, 13 8 16
SYMBOL G1, G2
1A to 6A
NAME AND FUNCTION
3 State Output Enable Input Data Inputs
1Y to 6Y Data Outputs
GND VCC
Ground (0V) Positive Supply Voltage
TRUTH TABLE
t(s)INPUTS cG duL roL
H
PX: Don’t Care teZ: High Impedance
An
L H X
...
Similar Datasheet