DatasheetsPDF.com

MAX1198 Dataheets PDF



Part Number MAX1198
Manufacturers Maxim
Logo Maxim
Description Dual / 8-Bit / 100Msps / 3.3V / Low-Power ADC
Datasheet MAX1198 DatasheetMAX1198 Datasheet (PDF)

19-2412; Rev 0; 4/02 Dual, 8-Bit, 100Msps, 3.3V, Low-Power ADC with Internal Reference and Parallel Outputs General Description The MAX1198 is a 3.3V, dual, 8-bit analog-to-digital converter (ADC) featuring fully differential wideband trackand-hold (T/H) inputs, driving two ADCs. The MAX1198 is optimized for low power, small size, and high-dynamic performance for applications in imaging, instrumentation, and digital communications. This ADC operates from a single 2.7V to 3.6V supply, consuming .

  MAX1198   MAX1198



Document
19-2412; Rev 0; 4/02 Dual, 8-Bit, 100Msps, 3.3V, Low-Power ADC with Internal Reference and Parallel Outputs General Description The MAX1198 is a 3.3V, dual, 8-bit analog-to-digital converter (ADC) featuring fully differential wideband trackand-hold (T/H) inputs, driving two ADCs. The MAX1198 is optimized for low power, small size, and high-dynamic performance for applications in imaging, instrumentation, and digital communications. This ADC operates from a single 2.7V to 3.6V supply, consuming only 264mW, while delivering a typical signal-to-noise and distortion (SINAD) of 48.1dB at an input frequency of 50MHz and a sampling rate of 100Msps. The T/H-driven input stages incorporate 400MHz (-3dB) input amplifiers. The converters may also be operated with singleended inputs. In addition to low operating power, the MAX1198 features a 3.2mA sleep mode, as well as a 0.15µA power-down mode to conserve power during idle periods. An internal 2.048V precision bandgap reference sets the full-scale range of the ADC. A flexible reference structure allows the use of this internal or an externally applied reference, if desired, for applications requiring increased accuracy or a different input voltage range. The MAX1198 features parallel, CMOS-compatible threestate outputs. The digital output format can be set to two’s complement or straight offset binary through a single control pin. The device provides for a separate output power supply of 1.7V to 3.6V for flexible interfacing with various logic families. The MAX1198 is available in a 7mm x 7mm, 48-pin TQFP package, and is specified for the extended industrial (-40°C to +85°C) temperature range. Pin-compatible lower speed versions of the MAX1198 are also available. Refer to the MAX1195 data sheet for 40Msps and the MAX1197 data sheet for 60Msps. In addition to these speed grades, this family includes a multiplexed output version (MAX1196, 40Msps), for which digital data is presented time interleaved and on a single, parallel 8-bit output port. For a 10-bit, pin-compatible upgrade, refer to the MAX1180 data sheet. With the N.C. pins of the MAX1198 internally pulled down to ground, this ADC becomes a drop-in replacement for the MAX1180. o Single 2.7V to 3.6V Operation o Excellent Dynamic Performance 48.1dB/47.6dB SINAD at fIN = 50MHz/200MHz 66dBc/61.5dBc SFDR at fIN = 50MHz/200MHz o -72dB Interchannel Crosstalk at fIN = 50MHz o Low Power 264mW (Normal Operation) 10.6mW (Sleep Mode) 0.5µW (Shutdown Mode) o 0.05dB Gain and ±0.1° Phase Matching o Wide ±1VP-P Differential Analog Input Voltage Range o 400MHz -3dB Input Bandwidth o On-Chip 2.048V Precision Bandgap Reference o User-Selectable Output Format—Two’s Complement or Offset Binary o Pin-Compatible 8-Bit and 10-Bit Upgrades Available Features MAX1198 Ordering Information PART MAX1198ECM TEMP RANGE -40°C to +85°C PIN-PACKAGE 48 TQFP-EP* *EP = Exposed paddle Functional Diagram and Pin Compatible Upgrades table appear at end of data sheet. Pin Configuration.


MAX1196 MAX1198 MAX120


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)