MAX1779

19-1795; Rev 0; 11/00 Low-Power Triple-Output TFT LCD DC-DC Converter General Description The MAX1779 triple-output DC-DC converter provides highly efficient regulated voltages required by small active matrix, thin-film transistor (TFT) liquid-crystal displays (LCDs). One high-power DC-DC converter and two low-power charge pumps convert the +2.7V to +5.5V input supply voltage into three independent output voltages. The primary high-power DC-DC converter generates a boosted output voltage (VMAIN) up to 13V that is regulated within ±1%. The low-power BiCMOS control circuitry and the low on-resistance (1Ω) of the integrated power MOSFET allows efficiency up to 91%. The 250kHz current-mode pulse-width modulation (PWM) architecture provides fast transient response and allows the use of ultra-small inductors and ceramic capacitors. The dual charge pumps independently regulate one positive output (VPOS) and one negative output (VNEG). These low-power outputs use external diode and capacitor stages (as many stages as required) to regulate output voltages up to +40V and down to -40V. A proprietary regulation algorithm minimizes output ripple, as well as capacitor sizes for both charge pumps. The MAX1779 is available in the ultra-thin TSSOP package (1.1mm max height). Features o Three Integrated DC-DC Converters o 250kHz Current-Mode PWM Boost Regulator Up to +13V Main High-Power Output ±1% Accuracy High Efficiency (91%) o Dual Charge-Pump Outputs Up to +40V Positive Charge-Pump Outp...