Connect PLC. 82562ET Datasheet
82562ET 10/100 Mbps Platform LAN Connect (PLC)
|Total Page||21 Pages|
82562ET 10/100 Mbps Platform LAN
s IEEE 802.3 10BASE-T/100BASE-TX
compliant physical layer interface
s IEEE 802.3u Auto-Negotiation support
s Digital Adaptive Equalization control
s Link status interrupt capability
s XOR tree mode support
s 3-port LED support (speed, link and
s 10BASE-T auto-polarity correction
s LAN Connect Interface
s Diagnostic loopback mode
s 1:1 transmit transformer ratio support
s Low power (less than 300 mW in active
s Reduced power in “unplugged mode” (less
than 50 mW)
s Automatic detection of “unplugged mode”
s 3.3 V device
s 48-pin Shrink Small Outline Package
Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual
property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability
whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel® products including liability or warranties relating
to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not
intended for use in medical, life saving, or life sustaining applications.
Intel may make changes to specifications and product descriptions at any time, without notice.
Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for
future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
The 82562ET PLC may contain design defects or errors known as errata which may cause the product to deviate from published specifications.
Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an ordering number and are referenced in this document, or other Intel literature may be obtained by calling 1-800-
548-4725 or by visiting Intel's website at http://www.intel.com.
Copyright © 2003, Intel Corporation
* Other brands and names are the property of their respective owners.
|Features||Datasheet pdf 82562ET 10/100 Mbps Platform LAN Connect (PLC) Networking Silicon Datasheet P roduct Features s s s s s s s s IEEE 8 02.3 10BASE-T/100BASE-TX compliant phys ical layer interface IEEE 802.3u Auto-N egotiation support Digital Adaptive Equ alization control Link status interrupt capability XOR tree mode support 3-por t LED support (speed, link and activity ) 10BASE-T auto-polarity correction LAN Connect Interface s s s s s s s Diag nostic loopback mode 1:1 transmit trans former ratio support Low power (less th an 300 mW in active transmit mode) Redu ced power in “unplugged mode” (less than 50 mW) Automatic detection of “ unplugged mode” 3.3 V device 48-pin S hrink Small Outline Package Revision 1 .3 March 2003 Information in this docu ment is provided in connection with Int el® products. No license, express or i mplied, by estoppel or otherwise, to an y intellectual property rights is grant ed by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assume.|
|Keywords||82562ET, datasheet, pdf, Intel Corporation, 82562ET, 10/100, Mbps, Platform, LAN, Connect, PLC, 2562ET, 562ET, 62ET, 82562E, 82562, 8256, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute|