4-BIT SINGLE CHIP OTP MICRO CONTROLLER
NJU3552
PRELIMINARY
4-BIT SINGLE CHIP OTP MICRO CONTROLLER
s GENERAL DESCRIPTION
The NJU3552 is the C-MOS 4-bit Single ...
Description
NJU3552
PRELIMINARY
4-BIT SINGLE CHIP OTP MICRO CONTROLLER
s GENERAL DESCRIPTION
The NJU3552 is the C-MOS 4-bit Single Chip OTP type Micro Controller with programmable Flash Memory. It is completely compatible with the NJU3502 in function and the pin configuration. Therefore, the NJU3552 is suitable for the final evaluation before NJU3502 mask generation, the small quantity production and short leadtime. * In this data sheet, only OTP programming and the difference between NJU3552 and NJU3502 are mentioned mainly. Therefore the detail function and specification should be referred on the NJU3502 data sheet.
s PACKAGE OUTLINE
NJU3552L
NJU3552M
s FEATURES
q q q q q Internal One Time Programmable ROM 1,024 X 8bits Internal Data RAM 64 X 4bits Wide operating voltage range 2.7V ~ 5.5V Package outline SDIP24 / DMP24 ROM programmer “SUPERPRO/L” by XELTEK co,.
s PIN CONFIGURATION IN OTP PROGRAMMING MODE
Open D0 D1 D2 Open D3 Open PROM CLK REQ VSS
1 2 3 4 5 6 7 8 9 10 11 12
24 23 22 21 20 19 18 17 16 15 14 13
VDD CNT2 CNT1 D7 Open D6 D5 D4 Open RESET
Note) The pin configuration in Normal operating mode is the same as NJU3502.
-1-
NJU3552
s BLOCK DIAGRAM
-2NJU3552
Interrupt
CPU CORE
Logic
VDD VSS
INT1
STACK X Reg Y Reg AC
EXTI/PE0
TEST RESET
TLU addr X’ Reg MUX Y’ Reg
PC
INT2
TIMER OTP ROM ALU CPU TIMING GENERATOR 1024 x 8 bit
PRESCALER
OSC
OSC1 OSC2
INT3
SDO/PF0
IR RAM 64 x 4 bit ID
SDI(O)/PF1
SIO
STANDBY CONTROLLER
SCK/CKOUT
PORT_A *3
*1 1 PORT_B *...
Similar Datasheet