NAND Gate. MM74HCT00 Datasheet


MM74HCT00 Gate. Datasheet pdf. Equivalent


Part Number

MM74HCT00

Description

Quad 2 Input NAND Gate

Manufacture

Fairchild

Total Page 6 Pages
Datasheet
Download MM74HCT00 Datasheet


MM74HCT00
February 1984
Revised February 1999
MM74HCT00
Quad 2 Input NAND Gate
General Description
The MM74HCT00 is a NAND gates fabricated using
advanced silicon-gate CMOS technology which provides
the inherent benefits of CMOS—low quiescent power and
wide power supply range. This device is input and output
characteristic and pin-out compatible with standard 74LS
logic families. All inputs are protected from static discharge
damage by internal diodes to VCC and ground.
MM74HCT devices are intended to interface between TTL
and NMOS components and standard CMOS devices.
These parts are also plug-in replacements for LS-TTL
devices and can be used to reduce power consumption in
existing designs.
Features
s TTL, LS pin-out and threshold compatible
s Fast switching: tPLH, tPHL=14 ns (typ)
s Low power: 10 µW at DC
s High fan out, 10 LS-TTL loads
Ordering Code:
Order Number Package Number
Package Description
MM74HCT00M
M14A
14-Lead Small Outline Integrate Circuit (SOIC), JEDEC MS-120, 0.150” Narrow
MM74HCT00SJ
M14D
14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
MM74HCT00MTC
MTC14
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
MM74HCT00N
N14A
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagram
Logic Diagram
Pin Assignments for DIP, SOIC, SOP and TSSOP
(1 of 4 gates)
Top View
© 1999 Fairchild Semiconductor Corporation DS005356.prf
www.fairchildsemi.com

MM74HCT00
Absolute Maximum Ratings(Note 1)
(Note 2)
Supply Voltage (VCC)
0.5 to +7.0V
DC Input Voltage (VIN)
1.5 to VCC+1.5V
DC Output Voltage (VOUT)
0.5 to VCC+0.5V
Clamp Diode Current (IIK, IOK)
±20 mA
DC Output Current, per pin (IOUT)
±25 mA
DC VCC or GND Current, per pin (ICC)
±50 mA
Storage Temperature Range (TSTG) 65°C to +150°C
Power Dissipation (PD)
(Note 3)
600 mW
S.O. Package only
500 mW
Lead Temperature (TL)
(Soldering 10 seconds)
260°C
Recommended Operating
Conditions
Min Max Units
Supply Voltage (VCC)
DC Input or Output Voltage
(VIN, VOUT)
Operating Temperature Range (TA)
Input Rise or Fall Times
4.5
0
40
5.5
VCC
+85
V
V
°C
(tr, tf)
500 ns
Note 1: Absolute Maximum Ratings are those values beyond which dam-
age to the device may occur.
Note 2: Unless otherwise specified all voltages are referenced to ground.
Note 3: Power Dissipation temperature derating — plastic “N” package:
12 mW/°C from 65°C to 85°C.
DC Electrical Characteristics
VCC = 5V ± 10% (unless otherwise specified)
Symbol
Parameter
Conditions
VIH Minimum HIGH Level
Input Voltage
VIL Maximum LOW Level
Input Voltage
VOH Minimum HIGH Level
VIN = VIH or VIL
Output Voltage
|IOUT| = 20 µA
|IOUT| = 4.0 mA, VCC = 4.5V
|IOUT| = 4.8 mA, VCC = 5.5V
VOL Maximum LOW Level
VIN = VIH
Voltage
|IOUT| = 20 µA
|IOUT| = 4.0 mA, VCC = 4.5V
|IOUT| = 4.8 mA, VCC = 5.5V
IIN Maximum Input
VIN = VCC or GND,
Current
VIH or VIL
ICC Maximum Quiescent
VIN = VCC or GND,
Supply Current
IOUT = 0 µA
VIN = 2.4V or 0.5V (Note 4)
Note 4: This is measured per input with all other inputs held at VCC or ground.
TA = 25°C
Typ
2.0
TA = −40 to 85°C TA = -55 to 125°C
Guaranteed Limits
2.0 2.0
Units
V
0.8 0.8
0.8 V
VCC VCC0.1
4.2 3.98
5.2 4.98
0 0.1
0.2 0.26
0.2 0.26
±0.05
1.0
0.18
0.3
VCC0.1
3.84
4.84
0.1
0.33
0.33
±0.5
10
0.4
VCC0.1
3.7
4.7
0.1
0.4
0.4
±1.0
40
0.5
V
V
V
V
V
V
µA
µA
mA
www.fairchildsemi.com
2


Features MM74HCT00 Quad 2 Input NAND Gate Februa ry 1984 Revised February 1999 MM74HCT0 0 Quad 2 Input NAND Gate General Descri ption The MM74HCT00 is a NAND gates fab ricated using advanced silicon-gate CMO S technology which provides the inheren t benefits of CMOS—low quiescent powe r and wide power supply range. This dev ice is input and output characteristic and pin-out compatible with standard 74 LS logic families. All inputs are prote cted from static discharge damage by in ternal diodes to VCC and ground. MM74HC T devices are intended to interface bet ween TTL and NMOS components and standa rd CMOS devices. These parts are also p lug-in replacements for LS-TTL devices and can be used to reduce power consump tion in existing designs. Features s T TL, LS pin-out and threshold compatible s Fast switching: tPLH , tPHL=14 ns (t yp) s Low power: 10 µW at DC s High fa n out, 10 LS-TTL loads Ordering Code: Order Number MM74HCT00M MM74HCT00SJ MM7 4HCT00MTC MM74HCT00N Package Number M14A M14D MTC14 N14A Package D.
Keywords MM74HCT00, datasheet, pdf, Fairchild, Quad, 2, Input, NAND, Gate, M74HCT00, 74HCT00, 4HCT00, MM74HCT0, MM74HCT, MM74HC, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)