MM74HCT04 Hex Inverter Datasheet

MM74HCT04 Datasheet, PDF, Equivalent


Part Number

MM74HCT04

Description

Hex Inverter

Manufacture

Fairchild

Total Page 6 Pages
Datasheet
Download MM74HCT04 Datasheet


MM74HCT04
February 1984
Revised February 1999
MM74HCT04
Hex Inverter
General Description
The MM74HCT04 is a logic function fabricated by using
advanced silicon-gate CMOS technology which provides
the inherent benefits of CMOS - low quiescent power and
wide power supply range. This device is input and output
characteristic as well as pin-out compatible with standard
74LS logic families. The MM74HCT04, triple buffered, hex
inverters, features low power dissipation and fast switching
times. All inputs are protected from static discharge by
internal diodes to VCC and ground.
MM74HCT devices are intended to interface between TTL
and NMOS components and standard CMOS devices.
These parts are also plug-in replacements for LS-TTL
devices and can be used to reduce power consumption in
existing designs.
Features
s TTL, LS pin-out and threshold compatible
s Fast switching: tPLH, tPHL=12 ns (typ)
s Low power: 10 µW at DC, 3.7 mW at 5 MHz
s High fanout: 10 LS loads
s Inverting, triple buffered
Ordering Code:
Order Number Package Number
Package Description
MM74HCT04M
M14A
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow
MM74HCT04SJ
M14D
14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
MM74HCT04MTC
MTC14
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
MM74HCT04N
N14A
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagram
Pin Assignments for DIP, SOIC, SOP and TSSOP
Top View
© 1999 Fairchild Semiconductor Corporation DS005357.prf
www.fairchildsemi.com

MM74HCT04
Absolute Maximum Ratings(Note 1)
(Note 2)
Supply Voltage (VCC)
0.5 to +7.0V
DC Input Voltage (VIN)
1.5 to VCC +1.5V
DC Output Voltage (VOUT)
0.5 to VCC +0.5V
Clamp Diode Current (IIK, IOK)
±20 mA
DC Output Current, per pin (IOUT)
±25 mA
DC VCC or GND Current, per pin (ICC)
±50 mA
Storage Temperature Range (TSTG) 65°C to +150°C
Power Dissipation (PD)
(Note 3)
600 mW
S.O. Package only
500 mW
Lead Temperature (TL)
(Soldering 10 seconds)
260°C
Recommended Operating
Conditions
Min Max Units
Supply Voltage (VCC)
DC Input or Output Voltage
4.5 5.5
V
(VIN, VOUT)
Operating Temperature Range (TA)
Input Rise or Fall Times
0
40
VCC
+85
V
°C
(tr, tf)
500 ns
Note 1: Absolute Maximum Ratings are those values beyond which dam-
age to the device may occur.
Note 2: Unless otherwise specified all voltages are referenced to ground.
Note 3: Power Dissipation temperature derating — plastic “N” package:
12 mW/°C from 65°C to 85°C.
DC Electrical Characteristics
VCC = 5V ±10% (unless otherwise specified)
Symbol
Parameter
Conditions
VIH Minimum HIGH Level
Input Voltage
VIL Maximum LOW Level
Input Voltage
VOH Minimum HIGH Level
VIN = VIL
Output Voltage
|IOUT| = 20 µA
|IOUT| = 4.0 mA, VCC = 4.5V
|IOUT| = 4.8 mA, VCC = 5.5V
VOL Maximum LOW Level
VIN = VIH
Voltage
|IOUT| = 20 µA
|IOUT| = 4.0 mA, VCC = 4.5V
|IOUT| = 4.8 mA, VCC = 5.5V
IIN Maximum Input
VIN = VCC or GND,
Current
VIH or VIL
ICC Maximum Quiescent
VIN = VCC or GND
Supply Current
IOUT = 0 µA
VIN = 2.4V or 0.5V (Note 4)
Note 4: This is measured per input with all other inputs held at VCC or ground.
TA = 25°C
Typ
2.0
TA = −40 to 85°C TA = −55 to 125°C
Guaranteed Limits
2.0 2.0
Units
V
0.8 0.8
0.8 V
VCC VCC 0.1
4.2 3.98
5.2 4.98
VCC 0.1
3.84
4.84
0 0.1
0.2 0.26
0.2 0.26
±0.1
0.1
0.33
0.33
±1.0
2.0 20
0.3 0.4
VCC 0.1
3.7
4.7
0.1
0.4
0.4
±1.0
40
0.5
V
V
V
V
V
V
µA
µA
mA
www.fairchildsemi.com
2


Features MM74HCT04 Hex Inverter February 1984 Re vised February 1999 MM74HCT04 Hex Inve rter General Description The MM74HCT04 is a logic function fabricated by using advanced silicon-gate CMOS technology which provides the inherent benefits of CMOS - low quiescent power and wide po wer supply range. This device is input and output characteristic as well as pi n-out compatible with standard 74LS log ic families. The MM74HCT04, triple buff ered, hex inverters, features low power dissipation and fast switching times. All inputs are protected from static di scharge by internal diodes to VCC and g round. MM74HCT devices are intended to interface between TTL and NMOS componen ts and standard CMOS devices. These par ts are also plug-in replacements for LS -TTL devices and can be used to reduce power consumption in existing designs. Features s TTL, LS pin-out and thresho ld compatible s Fast switching: tPLH , tPHL=12 ns (typ) s Low power: 10 µW at DC, 3.7 mW at 5 MHz s High fanout: ≥ 10 LS loads s Inverting, t.
Keywords MM74HCT04, datasheet, pdf, Fairchild, Hex, Inverter, M74HCT04, 74HCT04, 4HCT04, MM74HCT0, MM74HCT, MM74HC, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)