MM74HCT08 AND Gate Datasheet

MM74HCT08 Datasheet, PDF, Equivalent


Part Number

MM74HCT08

Description

Quad 2-Input AND Gate

Manufacture

Fairchild

Total Page 6 Pages
Datasheet
Download MM74HCT08 Datasheet


MM74HCT08
December 1983
Revised February 1999
MM74HCT08
Quad 2-Input AND Gate
General Description
The MM74HCT08 is a logic function fabricated by using
advanced silicon-gate CMOS technology which provides
the inherent benefits of CMOS—low quiescent power and
wide power supply range. This device is input and output
characteristic and pinout compatible with standard 74LS
logic families. All inputs are protected from static discharge
damage by internal diodes to VCC and ground.
MM74HCT devices are intended to interface between TTL
and NMOS components and standard CMOS devices.
These parts are also plug-in replacements for LS-TTL
devices and can be used to reduce power consumption in
existing designs.
Features
s TTL, LS pin-out and threshold compatible
s Fast switching: tPLH, tPHL = 12 ns (typ)
s Low power: 10 µW at DC
s High fan-out, 10 LS-TTL loads
Ordering Code:
Order Number Package Number
Package Description
MM74HCT08M
M14A
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow
MM74HCT08SJ
M14D
14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
MM74HCT08MTC
MTC14
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
MM74HCT08N
N14A
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagram
Pin Assignments for DIP, SOIC, SOP and TSSOP
Logic Diagram
© 1999 Fairchild Semiconductor Corporation DS005754.prf
www.fairchildsemi.com

MM74HCT08
Absolute Maximum Ratings(Note 1)
(Note 2)
Supply Voltage (VCC)
DC Input Voltage (VIN)
DC Output Voltage (VOUT)
Clamp Diode Current (IIK, IOK)
DC Output Current, per pin (IOUT)
DC VCC or GND Current, per pin (ICC)
Storage Temperature Range (TSTG)
Power Dissipation (PD)
(Note 3)
S.O. Package only
Lead Temperature (TL)
(Soldering 10 seconds)
0.5 to +7.0V
1.5 to VCC +1.5V
0.5 to VCC +0.5V
±20 mA
±25 mA
±50 mA
65°C to +150°C
600 mW
500 mW
260°C
Recommended Operating
Conditions
Min Max Units
Supply Voltage (VCC)
DC Input or Output Voltage
4.5 5.5 V
(VIN, VOUT)
Operating Temperature Range (TA)
Input Rise or Fall Times
0 VCC
40 +85
V
°C
(tr, tf)
500 ns
Note 1: Absolute Maximum Ratings are those values beyond which dam-
age to the device may occur.
Note 2: Unless otherwise specified all voltages are referenced to ground.
Note 3: Power Dissipation temperature derating — plastic “N” package 12
mW/°C from 65°C to 85°C.
DC Electrical Characteristics
VCC = 5V ± 10% (unless otherwise specified)
Symbol
Parameter
Conditions
VIH Minimum HIGH Level
Input Voltage
VIL Maximum LOW Level
Input Voltage
VOH Minimum HIGH Level
Output Voltage
VOL Maximum LOW Level
Voltage
IIN Maximum Input
Current
VIN = VIH or VIL
|IOUT| = 20 µA
|IOUT| = 4.0 mA, VCC = 4.5V
|IOUT| = 4.8 mA, VCC = 5.5V
VIN = VIH
|IOUT| = 20 µA
|IOUT| = 4.0 mA, VCC = 4.5V
|IOUT| = 4.8 mA, VCC = 5.5V
VIN = VCC or GND, VIH or VIL
ICC Maximum Quiescent
VIN = VCC or GND
Supply Current
IOUT = 0 µA
VIN = 2.4V or 0.5V (Note 4)
Note 4: This is measured per input with all other inputs held at VCC or ground.
TA = 25°C
Typ
2.0
TA = −40 to 85°C TA = −55 to 125°C
Guaranteed Limits
2.0 2.0
Units
V
0.8 0.8
0.8 V
VCC VCC0.1
4.2 3.98
5.2 4.98
VCC0.1
3.84
4.84
0 0.1
0.2 0.26
0.2 0.26
±0.1
0.1
0.33
0.33
±1.0
2.0 20
1.2 1.4
VCC0.1
3.7
4.7
0.1
0.4
0.4
±1.0
40
1.5
V
V
V
V
V
V
µA
µA
mA
www.fairchildsemi.com
2


Features MM74HCT08 Quad 2-Input AND Gate Decembe r 1983 Revised February 1999 MM74HCT08 Quad 2-Input AND Gate General Descript ion The MM74HCT08 is a logic function f abricated by using advanced silicon-gat e CMOS technology which provides the in herent benefits of CMOS—low quiescent power and wide power supply range. Thi s device is input and output characteri stic and pinout compatible with standar d 74LS logic families. All inputs are p rotected from static discharge damage b y internal diodes to VCC and ground. MM 74HCT devices are intended to interface between TTL and NMOS components and st andard CMOS devices. These parts are al so plug-in replacements for LS-TTL devi ces and can be used to reduce power con sumption in existing designs. Features s TTL, LS pin-out and threshold compat ible s Fast switching: tPLH , tPHL = 12 ns (typ) s Low power: 10 µW at DC s H igh fan-out, 10 LS-TTL loads Ordering Code: Order Number MM74HCT08M MM74HCT08 SJ MM74HCT08MTC MM74HCT08N Package Number M14A M14D MTC14 N14A Pac.
Keywords MM74HCT08, datasheet, pdf, Fairchild, Quad, 2-Input, AND, Gate, M74HCT08, 74HCT08, 4HCT08, MM74HCT0, MM74HCT, MM74HC, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)