MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MMUN2111LT1/D
Bias Resistor Transistor
PNP Silicon Surf...
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MMUN2111LT1/D
Bias Resistor
Transistor
PNP Silicon Surface Mount
Transistor with Monolithic Bias Resistor Network
This new series of digital
transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor
Transistor) contains a single
transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base-emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the SOT-23 package which is designed for low power surface mount applications. Simplifies Circuit Design Reduces Board Space Reduces Component Count The SOT-23 package can be soldered using wave or reflow. The modified gull-winged leads absorb thermal stress during soldering eliminating the possibility of PIN 1 damage to the die. BASE Available in 8 mm embossed tape and reel. Use the (INPUT) Device Number to order the 7 inch/3000 unit reel. Replace “T1” with “T3” in the Device Number to order the 13 inch/10,000 unit reel. MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating Collector-Base Voltage Collector-Emitter Voltage Collector Current Total Power Dissipation @ TA = 25°C(1) Derate above 25°C Symbol VCBO VCEO IC PD R1 R2 PIN 3 COLLECTOR (OUTPUT)
MMUN2111LT1 SERIES
Motorola Preferred Devices
PNP SILICON BIAS RESISTOR TRAN...