DatasheetsPDF.com

NTE1871 Dataheets PDF



Part Number NTE1871
Manufacturers NTE
Logo NTE
Description Integrated Circuit Module - Dual AF Power Amplifier / 50W/Ch / Dual Power Supplies
Datasheet NTE1871 DatasheetNTE1871 Datasheet (PDF)

NTE1871 Integrated Circuit Module – Dual AF Power Amplifier, 50W/Ch, Dual Power Supplies Features: D Built–In Muting Circuit to Cut–Off Pop Noise Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Maximum Supply Voltage, VCCmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±52.5V Junction Temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C Operatin.

  NTE1871   NTE1871


Document
NTE1871 Integrated Circuit Module – Dual AF Power Amplifier, 50W/Ch, Dual Power Supplies Features: D Built–In Muting Circuit to Cut–Off Pop Noise Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Maximum Supply Voltage, VCCmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±52.5V Junction Temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C Operating Case Temperature, TC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +125°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –30° to +125°C Thermal Resistance, Junction–to–Case, RthJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8°C/W Availabe Time for Lead Shorted (VCC = ±35V, RL = 8Ω, f = 50MHz, PO = 50W), ts . . . . . . . . . . 2sec Recommended Operating Conditions: (TA = +25°C unless otherwise specified) Recommended Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±35V Load Resistance, RL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Ω Electrical Characteristics: (TA = +25°C, VCC = ±35V, RL = 8Ω, Rg = 600Ω, VG = 40dB, RL: Non–Inductive Load unless otherwise specified) Parameter Quiescent Current Output Power Symbol ICCO PO (1) PO (2) Total Harmonic Distortion Frequency Characteristic Input Resistance Output Noise Voltage Middle Point Voltage Muting Voltage THD fL, fH ri VNO VN VM Test Conditions VCC = ±42V THD = 0.4%, f = 20Hz to 20kHz VCC = ±31V, THD = 1.0%, RL = 4Ω, f = 1kHz PO = 1W, f = 1kHz PO = 1W, +0 , –3dB PO = 1W, f = 1kHz VCC = ±42V, Rg = 10kΩ VCC = ±42V – – –70 –2 Min 20 50 55 – Typ 40 – – – 20 to 50k 55 – 0 –5 – 1.2 +70 –10 Max 100 – – 0.3 Unit mA W W % Hz kΩ mVrms mV V Note 1. For power supply at the time of test, use a constant–voltage power supply unless otherwise specified. Note 2. The output noise voltage is represented by the peak value on RMS scale (VTVM) of average value indicating type. For AC power supply, use an AC stabilized power supply (50Hz) to eliminate the effect of flicker noise in AC primary line. Pin Connection Diagram (Front View) 18 Input 2 17 NFB 2 16 GND 15 Input Bias 2 14 Power GND 2 13 Output 2 12 Bootstrap 11 VCC 10 Output 1 9 Power GND 8 Mute t Cap 7 Mute Adjust 6 Mute 5 Input Bias 1 4 Feedback 3 GND 1 2 NFB 1 1 Input 1 2.520 (64.0) 2.190 (55.6) .334 (8.5) 1.440 (36.4) 1 .141 (3.6) Dia (2 Holes) 18 .737 (18.7) 1.030 (32.5) .158 (4.0) .100 (2.54) 1.700 (43.18) .114 (5.5) .


NTE1870 NTE1871 NTE1872


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)