Voltage Decoder/Driver. NTE2028 Datasheet

NTE2028 Decoder/Driver. Datasheet pdf. Equivalent

Part NTE2028
Description Integrated Circuit 7-Segment High Voltage Decoder/Driver
Feature NTE2028 Integrated Circuit 7–Segment High Voltage Decoder/Driver Description: The NTE2028 is an inte.
Manufacture NTE
Datasheet
Download NTE2028 Datasheet




NTE2028
NTE2028
Integrated Circuit
7–Segment High Voltage Decoder/Driver
Description:
The NTE2028 is an integrated circuit in a 16–Lead DIP type package custom designed to decode
four lines of BCD and drive a gas–filled seven–segment display tube.
Each output constitutes a switchable, adjustable current sink which provides constant current to the
tube segment, even with high tube anode supply tolerance or fluctuation. These current sinks have
a voltage compliance from 3V to at least 80V; typically the output current varies 1% for output voltage
changes of 3 to 50V. Each bit line of the decoder switches a current sink on or off as prescribed by
the input code. Each current sink is ratioed to the b–output current as required for even illumination
of all segments.
Output currents may be varied over the 0.2 to 1.5 mA range for driving various tube types or multiplex
operation. The output current is adjusted by connecting an external program resistor (Rp) from VCC
to the Program input in accordance with the programming curve. The circuit design provides a one–
to–one correlation between program input current and b–segment output current.
The Blanking Input provides unconditional blanking of any output display, while the Ripple Blanking
pins allow simple leading or trailing zero blanking.
Features:
D Current Sink Outputs
D Adjustable Output Current: 0.2 to 1.5mA
D High Output Breakdown Voltage: 110V Typ
D Suitable for Multiplex Operation
D Blanking and Ripple Blanking Provisions
D Low Fan–In and Low Power
Absolute Maximum Raings: (Note 1)
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7V
Input Voltage (Except BI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V
Input Voltage (BI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC
Segment Output Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80V
Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600mW
Transient Segment Output Current (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C
Lead Temperature (During Soldering, 10sec), TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +300°C
Note 1. “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot
be guaranteed. Except for “Operating Temperature Range” they are not meant to imply that
the device should be operated at these limits. The table of “Electrical Chracteristics” pro-
vides conditions for actual device operation.
Note 2. In all applications transient segment output current must be limited to 50mA. This may be
accomplished in DC applications by connecting a 2.2k resistor from the anode–supply filter
capacitor to the display anode, or by current limiting the anode driver in multiplex applica-
tions.



NTE2028
Recommended Operating Conditions:
Parameter
Symbol
Supply Voltage
Operating Temperature
VCC
TA
Test Conditions
Min Typ Max Unit
4.75 5.25 V
0 70 °C
Electrical Characteristics: (Note 3, Note 4)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Logical 1Input Voltage
Logical 0Input Voltage
Logical 1Output Voltage
Logical 0Output Voltage
Logical 1Input Current
Logical 0Input Current
VIH
VIL
VOH
VOL
IIH
IIL
VCC = Min
VCC = Min
VCC = Min, IOUT = 200µA, RBO
VCC = Min, IOUT = 8mA, RBO
VCC = Max, Except BI VIN = 2.4V
VIN = 5.5V
VCC = Max, VIN = 0.4V Except BI
BI
2.0 – – V
– – 0.8 V
2.4 3.7 V
0.13 0.4 V
2 15 µA
4 400 µA
– –300 600 µA
– –1.2 2.0 mA
Power Supply Current
Input Diode Clamp Voltage
Segment Outputs ONCurrent Ratio
ICC VCC = Max, RP = 2.2k, All Inputs = 0V 27 43 mA
VCD VCC = Max, TA = +25°C, IIN = 12mA
– –0.9 1.5 V
IO All Outputs = 50V,
IOUTb = Ref
Outputs a, f, g 0.84 0.93 1.02
Output c
1.12 1.25 1.38
Output d
0.90 1.00 1.10
Output e
0.99 1.10 1.21
Output b ONCurrent
Output Saturation Voltage
Output Leakage Current
Output Breakdown Voltage
Propagation Delays
BCD Input to Segment Output
BI to Segment Output
Ib ON
VSAT
ICEX
VBR
tpd
VCC = 5V,
VOUTb = 50V,
All Other Outputs 5V,
TA = +25°C
RP = 18.1k
RP = 7.03k
RP = 3.40k
RP = 2.20k
VCC = Min, RP = 1k ±5%,
IOUTb = 2mA, Note 5
VOUT = 75V, BI = 0V, RP = 2.2k
IOUT = 250µA, BI = 0V, RP = 2.2k
VCC = 5V, TA = +25°C
0.15 0.20 0.25 mA
0.45 0.50 0.55 mA
0.90 1.00 1.10 mA
1.35 1.50 1.65 mA
0.8 2.5 V
0.003 3.0 µA
80 110 V
0.4 10 µs
0.4 10 µs
RBI to Segment Output
0.7 10 µs
RBI to RBO
0.4 10 µs
Note 3. Unless otherwise specified, Min/Max limits apply across TA = 0° to +70°C. All typical values
are or TA = +25°C and VCC = 5V.
Note 4. All currents into device pins ahown as positive, out of device pins as negative, all voltages
referenced to GND unless otherwise sepcified. All values shown as Max or Min on absolute
value basis.
Note 5. For saturation mode the segment output currents are externally limited and ratioed.







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)